Audited Supplier
This ball mill sanitary grinding machine mainly includes: cylinder part, transmission part, electrical control.
Grinding method: wet and intermittent type (fine grinding).
Uses: mainly used for the crushing, grinding and mixing of ceramic raw materials.
The material in the barrel: raw materials, grinding media and water.
| Type | Drum size | Efficient volume | Rotating speed of cylinder | Lining plate | Main motor and reducer | Auxiliary motor | |||||
| Ømm×mm | M3 | Main speed | Auxiliary speed | Type | Power | Rotating speed | Type | Power | Rotating speed | ||
| 0.05T | 600×700 | 0.132 | 50 | - | High alumina lining | Y100L-6 | 1.5 | 50 | - | - | - |
| 0.1T | 660*770 | 0.18 | 50 | - | High alumina lining | Y112M-6 | 2.2 | 50 | - | - | - |
| 0.2T | 910×1120 | 0.56 | 38 | - | High alumina lining | Y132M1-6 | 4 | 38 | - | - | - |
| 0.5T | 1200×1400 | 1.3 | 31.5 | - | High alumina lining | Y132M2-6 | 5.5 | 31.5 | - | - | - |
| 1T | 1600×1800 | 3.12 | 25.5 | - | High alumina lining | Y160M-4 | 11 | 25.5 | - | - | - |
| 1.5T | 1800×2100 | 4.69 | 23 | - | High alumina lining | Y180L-6 | 15 | 23 | - | - | - |
| 2.5T | 2200×2200 | 7.3 | 22.7 | - | High alumina lining | Y225M-6 | 30 | 22.7 | - | - | - |
| 5T | 2700×2700 | 11.5 | 17.2 | 1 | Stone lining | Y208S-6 | 45 | 17.2 | XWDC5.5-7-87 | 5.5 | 1 |
| 5T | 2400×2600 | 10.39 | 19.6 | 1.1 | Mid-alumina lining | Y280M-6 | 55 | 19.6 | XWDC5.5-7-87 | 5.5 | 1.1 |
| 5T | 2400×2600 | 10.39 | 19.6 | 1.1 | High alumina lining | Y280M-6 | 55 | 19.6 | XWDC5.5-7-87 | 5.5 | 1.1 |
| 8T | 2700×3400 | 15 | 15.9 | 1 | Stone lining | Y280M-6 | 55 | 15.9 | XWDC5.5-8-87 | 5.5 | 1 |
| 8T | 2700×3000 | 14.7 | 15.9 | 1 | Mid-alumina lining | Y280M-6 | 55 | 15.9 | XWDC5.5-7-87 | 5.5 | 1 |
| 8T | 2700×3000 | 14.7 | 15.9 | 1 | High alumina lining | Y280M-6 | 55 | 15.9 | XWDC5.5-7-87 | 5.5 | 1 |
| 10T | 2700×4000 | 17.87 | 16 | 1 | Stone lining | Y280S-4 | 75 | 16 | XWDC5.5-7-71 | 5.5 | 1 |
| 10T | 2700*3500 | 17.67 | 16 | 1 | Mid-alumina lining | Y280M-4 | 90 | 16 | XWDC5.5-7-71 | 5.5 | 1 |
| 10T | 2700*3500 | 17.67 | 16 | 1 | High alumina lining | Y280M-4 | 90 | 16 | XWDC5.5-7-71 | 5.5 | 1 |
| 15T | 3000*5000 | 28.4 | 14 | 0.6 | Stone lining | Y315M-6 | 75 | 14 | XWDC5.5-7-71 | 5.5 | 0.6 |
| 15T | 3000*4560 | 28.4 | 14 | 0.6 | Mid-alumina lining | Y315M-6 | 90 | 14 | XWDC5.5-8-87 | 5.5 | 0.6 |
| 15T | 3000*4560 | 28.4 | 14 | 0.6 | High alumina lining | Y315M-6 | 90 | 14 | XWDC5.5-8-87 | 5.5 | 0.6 |
| 20T | 3200*5100 | 33.44 | 13.5 | 0.64 | Stone lining | Y315L1-6 | 110 | 13.5 | XWDC11-9-87 | 11 | 0.64 |
| 20T | 3200*4500 | 32.05 | 13.5 | 0.64 | Mid-alumina lining | Y315L1-6 | 110 | 13.5 | XWDC11-9-87 | 11 | 0.64 |
| 20T | 3200*4500 | 32.05 | 13.5 | 0.64 | High alumina lining | Y315L1-6 | 110 | 13.5 | XWDC11-9-87 | 11 | 0.64 |
| Type | Floor space | Equipment weight (kgs) | Foundation bearing capacity | Central distance (mm) | Inlet size | Outlet size |
| Unit:mm | doesn't include lining and grinding body | ≥kN | (±2mm) | mm | mm | |
| 0.05T | 1560*1160 | 450 | 65 | 1263 | 118(113)*69 | 118(113)*6 |
| 0.1T | 1560*1190 | 550 | 65 | 1237 | 118(113)*69 | 118(113)*6 |
| 0.2T | 1730*1500 | 800 | 100 | 1484 | 395(398)*140 | 110*95 |
| 0.5T | 3100*2600 | 1500 | 200 | 1780 | 395(398)*140 | 110*95 |
| 1T | 3445*3870 | 3000 | 400 | 2492 | 440(445)*150 | 110(115)*160 |
| 1.5T | 3500*4400 | 3300 | 500 | 2492 | 440(445)*150 | 110(115)*160 |
| 2.5T | 3840*4550 | 4200 | 1000 | 3014 | 440(445)*150 | 110(115)*160 |
| 5T | 4160*5270 | 10000 | 1500 | 3530 | 495(498)*178 | 245(250)*150 |
| 5T | 4400**5850 | 10500 | 1500 | 3530 | 495(498)*178 | 245(250)*150 |
| 5T | 4400*5850 | 10500 | 1500 | 3530 | 495(498)*178 | 245(250)*150 |
| 8T | 5500*6340 | 11000 | 2000 | 4290 | 495(498)*178 | 245(250)*150 |
| 8T | 5100*6310 | 10700 | 2000 | 4290 | 495(498)*178 | 245(250)*150 |
| 8T | 5100*6310 | 10700 | 2000 | 4290 | 495(498)*178 | 245(250)*150 |
| 10T | 6500*6310 | 13000 | 2500 | 4936 | 495(498)*178 | 245(250)*150 |
| 10T | 6000*6310 | 13000 | 2500 | 4936 | 495(498)*178 | 245(250)*150 |
| 10T | 6000*6310 | 13000 | 2500 | 4936 | 495(498)*178 | 245(250)*150 |
| 15T | 7200*5940 | 16000 | 3500 | 6040 | 495(498)*178 | 245(250)*150 |
| 15T | 6760*5940 | 15000 | 3500 | 6040 | 495(498)*178 | 245(250)*150 |
| 15T | 6760*5940 | 15000 | 3500 | 6040 | 495(498)*178 | 245(250)*150 |
| 20T | 7730*7250 | 19000 | 5000 | 6140 | 495(498)*178 | 245(250)*150 |
| 20T | 7310*7250 | 18000 | 5000 | 6140 | 495(498)*178 | 245(250)*150 |
| 20T | 7310*7250 | 18000 | 5000 | 6140 | 495(498)*178 | 245(250)*150 |
1. High grinding efficiency: The 5-20T ball mill can be selected with frequency conversion speed regulation, and 8 operating speeds can be preset according to the process requirements, which improves the grinding efficiency, saves 20% of energy consumption and reduces costs. Various formulas can be pre-stored in the parameters, which can be switched at will according to the process during the production process;
2. Compact structure, simple operation (forward and reverse running state can be switched);
3. The large ball mill is equipped with an auxiliary motor, which helps to accurately position the grinding mouth and effectively mix the material, water and grinding body. The main motor and auxiliary motor have an interlock function;
4. Set emergency stop button and safety lock control, high safety;
5. The cylinder adopts submerged arc welding, which has large melting depth and high weld quality. Both ends of the shaft are heat treated to eliminate internal stress. Both ends of the shaft are processed simultaneously to ensure the coaxiality of the ball mill.
