Audited Supplier
CZXY-2750
One Year
One Year
CZXY
Plastic
4m× 2m× 2m
China
Product Description
Computer Automatic Thin Blade Slitter Scorer Machine (Configuration Instructions) - Servo Adjustment
1, Function Introduction:
Human machine interface - PLC control, this system is a more user-friendly robot operating system, with fast settings and order changing in seconds, greatly reducing waste of machine adjustment time.
(1) This machine adopts a train heavy rail as the support slide for the mobile knife base and wire base, which is stable and smooth
(2) Front and rear camera masters operate quickly and safely
(3) Minimum pressing distance 35mm × 100mm, suitable for over 95% of small cardboard boxes
(4) The minimum cutting width between knives is 150mm, and the shortest paper feeding is 180mm, 150 × 180 without deviation or inclination
(5) Paper separation and line pressing accuracy ± 0.5mm
(6) This machine can support one click switching between manual and automatic modes
(7) Left and right hand operation with one click switch, thickness 1.5-15 (E tile to 7 layers 3A)
(8) 3-layer, 5-layer, and 7-layer cardboard with one click confirmation and automatic gap adjustment
(9) Pre pressing wheel, wire pressing wheel, paper separator, automatic independent adjustment
(10) Equipped with manual/automatic knife sharpening
(11) In the automatic order mode of the operating system, it can be connected to the production management system ERP, support scanning order function, and can adjust orders without stopping the machine. The operation is simpler and error free, and can produce thousands of loose orders per day
(12) Jog fine adjustment
(13) Custom knife and line pressing distance
(14) Automatic counting
(15) Intelligent graphic operating system, easy to understand, easy to operate for ordinary workers
Advantages:
1. It can produce hundreds of individual orders every day
2. Manual and automatic one click switching.
3. Adjusting the machine takes about 1-10 seconds to change orders, which saves 3 times compared to a regular paper separator × 100-0.5 × 100=250 minutes.
4. The operation of this machine is extremely simple, and it can be used in a timely manner without training.
Functional features:
1. Automatic adjustment of pre pressing wheel, line pressing wheel, paper separator, and line
2. Customizable tool holder and crimping holder
3. The upper wire pressing steel wheel and the lower soft rubber shaft cardboard are easy to fold but not burst
4. Base adjustment - slider, slide rail, bottom knife holder (the bottom knife holder is a linear slide rail, and the slider is easy and free)
2,specification
4.Main performance: Imported products with reliable performance
(1)Human machine interface - PLC control, this system is a more user-friendly robot operating system, with a simple structure and easy maintenance
(2)Automatic gap adjustment and one click selection of corrugated shapes
5,Electrical diagram
6, Main structure
1, Function Introduction:
Human machine interface - PLC control, this system is a more user-friendly robot operating system, with fast settings and order changing in seconds, greatly reducing waste of machine adjustment time.
(1) This machine adopts a train heavy rail as the support slide for the mobile knife base and wire base, which is stable and smooth
(2) Front and rear camera masters operate quickly and safely
(3) Minimum pressing distance 35mm × 100mm, suitable for over 95% of small cardboard boxes
(4) The minimum cutting width between knives is 150mm, and the shortest paper feeding is 180mm, 150 × 180 without deviation or inclination
(5) Paper separation and line pressing accuracy ± 0.5mm
(6) This machine can support one click switching between manual and automatic modes
(7) Left and right hand operation with one click switch, thickness 1.5-15 (E tile to 7 layers 3A)
(8) 3-layer, 5-layer, and 7-layer cardboard with one click confirmation and automatic gap adjustment
(9) Pre pressing wheel, wire pressing wheel, paper separator, automatic independent adjustment
(10) Equipped with manual/automatic knife sharpening
(11) In the automatic order mode of the operating system, it can be connected to the production management system ERP, support scanning order function, and can adjust orders without stopping the machine. The operation is simpler and error free, and can produce thousands of loose orders per day
(12) Jog fine adjustment
(13) Custom knife and line pressing distance
(14) Automatic counting
(15) Intelligent graphic operating system, easy to understand, easy to operate for ordinary workers
Advantages:
1. It can produce hundreds of individual orders every day
2. Manual and automatic one click switching.
3. Adjusting the machine takes about 1-10 seconds to change orders, which saves 3 times compared to a regular paper separator × 100-0.5 × 100=250 minutes.
4. The operation of this machine is extremely simple, and it can be used in a timely manner without training.
Functional features:
1. Automatic adjustment of pre pressing wheel, line pressing wheel, paper separator, and line
2. Customizable tool holder and crimping holder
3. The upper wire pressing steel wheel and the lower soft rubber shaft cardboard are easy to fold but not burst
4. Base adjustment - slider, slide rail, bottom knife holder (the bottom knife holder is a linear slide rail, and the slider is easy and free)
2,specification
| N0 | Model | CZXY-2750 |
| 1 | No.s of slitting scoring | 4 Knife 6 line |
| 2 | Max.production speed | 180m/min |
| 3 | Max.feeding width | One knife and two knife maximum cutting 2100mm |
| 4 | Max.slitting width | 2500mm |
| 5 | Min.slitting width | 140mm |
| 6 | Min.feeding length | 180mm |
| 7 | Min.scoring distance | 35*100mm |
| 8 | Gap adjustment | automatic |
| 9 | Main motor power | 5.5-6KW |
| 10 | Dimension (l*w*h) | 3800*1000*1700mm |
| 11 | Overall weight | 2880kg |
- Major configuration:
| Configuration | |||
| Serial Number | Name | Brand | Origin |
| 1 | PLC | Panasonnic | Japan |
| 2 | touch screen | Weilun tong | TAIWAN |
| 3 | circuit breaker | Schneid | France |
| 4 | Continued electrical appliances | Schneid | France |
| 5 | push-button | Izumi | Japan |
| 6 | main motor | JINLONG | China |
| 7 | All servo drivers | Panasonic or Siemens or Delta | |
| 9 | Servo reducer | YongKun | TAIWAN |
| 10 | photosensor | OMRON | Japan |
| 11 | proximity switch | OMRON | Japan |
| 12 | air cylinder | 20×15 | China |
| 13 | frequency transformer | Siemens | Germany |
| 14 | bearing | human-oriented | China |
| 15 | tungsten steel blade | 230×122×1.3 | The divine work |
| 16 | electromagnetic valve | Sonuo tiangong | China |
| 17 | Pre-pressure, pressure line axis | Φ95 | 45# |
| 18 | Pre-pressure, pressure wire wheel | Φ158 | cast steel |
| 19 | Upper and lower paper output shafts | Φ158 | 40 The glue shaft |
4.Main performance: Imported products with reliable performance
(1)Human machine interface - PLC control, this system is a more user-friendly robot operating system, with a simple structure and easy maintenance
(2)Automatic gap adjustment and one click selection of corrugated shapes
5,Electrical diagram
6, Main structure
