Audited Supplier
SFERAX STANDARD SWISS1017
Solid Bearing
Oil-Lubricated Bearing
Hydrodynamic Bearing
Cast Iron
Radial
Maintenance-Free Bearing
Thin Film Lubrication
Noiseless
High Precison
Linear Bearing
High
Carton
8482109000
Product Description
Application
This ball bearing has high manufacturing standards, as well as all the fundamental qualities to ensure very high precision linear movements, without any stroke limitation, without play and
practically free of friction and wear.
Advantages
- Brass precision-milled ball tray (GBL)
- Smooth, jerk-free operation
- Noiseless
Datasheet
Enterprise purposes: quality first customer first!
Suzhou Dscon Mechanical and Electrical Equipment Co., Ltd. have successfully provided quality services for 107 countries and regions. We have an excellent design and development department.
On the basis of these strategies, the mode of product development and manufacturing for mass customization is researched. We can customize products according to the customers' requirement.
Packaging & Shipping
1.industrial packing+industrial cartons+pallets
2.single brand box+brand cartons+pallets
3.follow customer's requests
A.Plastic Tubes or Single Boxes ( Usually 10pcs in one plastic tube for steel bearings);
B.Cartons ( No more than 30kg for one carton );
C. Pallet ( Usually more than 400kg totally will use pallet )
D. Delivery time :7-35 days ( by sea or by air )
Generally,We will choose the most suitable packing method for products. If you have any special requirements for packing, pleasecontact us in advance.
After Sales Service
In order to meet the increasing market demand, and better serve the customers, we has built a professional team composed of sales engineers to provide perfect pre-sales and after-sales services.
We provide consulting services for maintenance, procurement and design staff concerning the basic knowledge, selection, installation and removal, lubrication, maintenance and equipment management of imported bearings.
All these services are mean to reduce the installation errors, form good work and safety habits and improve the efficiency of maintenance personnel, thus achieving the best use effect and the maximum bearing life.
We also help users analyze the failure of the bearing, confirm the causes, provide solutions for this issue and give suggestions on precautionary measures.
FAQ
Q:What's your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.
Q:What's the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.
Q:Do you offer free samples?
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users.
Q:How to place order?
A: 1. Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you;
2. Proforma Invoice made and sent to you as the price agreed by both parts;
3. Deposit Payment after confirming the PI and we arrange production;
4. Balance paid before shipment or after copy of Bill of Loading.
Contact with us now!
This ball bearing has high manufacturing standards, as well as all the fundamental qualities to ensure very high precision linear movements, without any stroke limitation, without play and
practically free of friction and wear.
Advantages
- Brass precision-milled ball tray (GBL)
- Smooth, jerk-free operation
- Noiseless
Datasheet
| Product Number | 1010.001017.10 |
| Product Designation | SFERAX STANDARD GBL 1017 B |
| Net Weight | 18 g |
| Outer diameter D | 17 |
| Inner diameter d | 10 |
| Length | 22 mm |
| Tolerance Inner diameter | 0/+20 µm |
| Tolerance outer diameter | 0/-12 µm |
| Tolerance length | 0/-350 µm |
| Max. eccentricity | <15 µm |
| Recommended tolerance on the shaft | h6 |
| Dynamic load capacity | 445.5 |
| Static load capacity N | 495 |
| Dynamic factor Y | 0.00202 |
| Diameter balls b | 2.000 mm |
| Diameter bottom of grooves D1 | 16.3 mm |
| Spacing grooves (0/+01 mm) E | 16 mm |
| Width groove 0/+0.1 mm e | 1.00 mm |
| Cage material | DIN MS60Pb (17660) |
| Housing material | DIN 100Cr6 (1.3505) |
| Number of ball tracks | 6 |
| Operating temperature | -30 / +80°C |
| Precision class | B |
| Recommended shaft quality | III |
| Tolerance Bore (pressed mounted) | -2/-10 µm |
| Tolerance bore (glue mounted) | H6 |
Enterprise purposes: quality first customer first!
Suzhou Dscon Mechanical and Electrical Equipment Co., Ltd. have successfully provided quality services for 107 countries and regions. We have an excellent design and development department.
On the basis of these strategies, the mode of product development and manufacturing for mass customization is researched. We can customize products according to the customers' requirement.
Packaging & Shipping
1.industrial packing+industrial cartons+pallets
2.single brand box+brand cartons+pallets
3.follow customer's requests
A.Plastic Tubes or Single Boxes ( Usually 10pcs in one plastic tube for steel bearings);
B.Cartons ( No more than 30kg for one carton );
C. Pallet ( Usually more than 400kg totally will use pallet )
D. Delivery time :7-35 days ( by sea or by air )
Generally,We will choose the most suitable packing method for products. If you have any special requirements for packing, pleasecontact us in advance.
After Sales Service
In order to meet the increasing market demand, and better serve the customers, we has built a professional team composed of sales engineers to provide perfect pre-sales and after-sales services.
We provide consulting services for maintenance, procurement and design staff concerning the basic knowledge, selection, installation and removal, lubrication, maintenance and equipment management of imported bearings.
All these services are mean to reduce the installation errors, form good work and safety habits and improve the efficiency of maintenance personnel, thus achieving the best use effect and the maximum bearing life.
We also help users analyze the failure of the bearing, confirm the causes, provide solutions for this issue and give suggestions on precautionary measures.
FAQ
Q:What's your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.
Q:What's the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.
Q:Do you offer free samples?
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users.
Q:How to place order?
A: 1. Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you;
2. Proforma Invoice made and sent to you as the price agreed by both parts;
3. Deposit Payment after confirming the PI and we arrange production;
4. Balance paid before shipment or after copy of Bill of Loading.
Contact with us now!
