Audited Supplier
IL series
Third Party Support
Driven by Walking Tractor
Agriculture
2000mm
Multi-Share Plough
Tractor
1-10
Wheel
Low Speed Once Into a Ditch
100-500m/h
ECE, EU, CE, EPA
1 Year
Ploughing
mingsin
Bubble Film or Carton or Wooden Case
using in 12-20hp walking tractor
Shandong
84321000
Product Description
Description:
The Moldboard plows are full mounted and sui table for ploughing on the cultivated the land with the soil resistance no more than 1.2kg.
The plow is simple in structure and light in weight. Suitable working scope is wide, after cultivation, the land surface is leveling and the furrow is narrow and the soil is well crushed and turned over.
Hydraulic reversible plow:
The modern agriculture requirement is lower cast and higher volume output. The cost for cultivation is paid more and more attention by the customers and to meet this requirement, Our company developed the series of reversal plough, the plough camber is deeply prefer by the customer all over the county in recent years particularly, the working speed is 8-10km/h.
The Moldboard plows are full mounted and sui table for ploughing on the cultivated the land with the soil resistance no more than 1.2kg.
The plow is simple in structure and light in weight. Suitable working scope is wide, after cultivation, the land surface is leveling and the furrow is narrow and the soil is well crushed and turned over.
Hydraulic reversible plow:
The modern agriculture requirement is lower cast and higher volume output. The cost for cultivation is paid more and more attention by the customers and to meet this requirement, Our company developed the series of reversal plough, the plough camber is deeply prefer by the customer all over the county in recent years particularly, the working speed is 8-10km/h.
| Type | Furrow width(mm) | Working depth(mm) | Type No. of bottoms | 2 Boars | 3 Boars | 4 Boars | 5 Boars | 6 Boars | 7 Boars |
| 18 | 180 | 140-160 | Working width(mm) | 360 | 540 | ||||
| Matched power(HP) | 400 | 15-20 | |||||||
| 20, 20A | 200 | 180-250 | Working width(mm) | 12-22 | 600 | 800 | 1000 | ||
| Matched power(HP) | 20-35 | 30-40 | 40-50 | ||||||
| 25 | 250 | 180-251 | Working width(mm) | 750 | 1000 | 1250 | |||
| Matched power(HP) | 35-40 | 50-60 | 60-70 | ||||||
| 27 | 270 | 160-200 | Working width(mm) | 810 | 1080 | 1350 | 1620 | 1890 | |
| Matched power(HP) | 28-30 | 50 | 60-65 | 75-80 | 75-80 | ||||
| 30-30G | 300 | 240-300 | Working width(mm) | 900 | 1200 | 1500 | 1800 | ||
| Matched power(HP) | 50-55 | 55-65 | 80-90 | 100-110 | |||||
| 35-35G | 350 | 270-300 | Working width(mm) | 1050 | 1400 | 1750 | 2100 | ||
| Matched power(HP) | 55-65 | 65-80 | 80-120 | 100-120 |
