Audited Supplier
(1) No gearbox: The high-efficiency permanent magnet synchronous motor and the screw rotor adopt an embedded integrated connect-ing shaft structure, without coupling failure or broken gear danger.
(2) No coupling: Two independent permanent magnet motors directly drive two airends without gear transmission, completely eliminating gear pitting.
(1) Independent permanent magnet motor drive, the whole process ofintelligent control, through the control of exhaust pressure and interstage pressure, so that the air end in different speeds, different pressures, always running in the best interstage pressure point.
(2) During operation, the respective optimum running speed is automatically calculated, and through the best matching and balancing of the compression ratio, the compressor is always in the optimum running state and obtains the best effciency.
(1) Independent permanent magnet motor drive, the whole process of intelligent control, through the control of exhaust pressure and interstage pressure, so that the air end in different speeds, different pressures, always running in the best interstage pressure point.
(2) During operation, the respective optimum running speed is automatically calculated, and through the best matching and balancing of the compression ratio, the compressor is always in the optimum running state and obtains the best effciency.
| Model | Working Pressure | Capacity | Molor Power kW/hp | Dimension (mm) | Net Weight (KGS) | Air Outlet | ||
| pSl | bar | cfm | m/min | |||||
| SGFM 371 | 87 | 6 | 310.7 | 8.8 | 37/50 | 2380*1300*1690 | 1500 | DN50 |
| 102 | 7 | 296.6 | 8.4 | |||||
| 116 | 8 | 282.5 | 8.0 | |||||
| 145 | 10 | 250.7 | 7.1 | |||||
| SGPM 45 | 87 | 6 | 416.7 | 11.8 | 45/60 | 2380*1300*1590 | 1750 | DN50 |
| 102 | 7 | 402.5 | 11.4 | |||||
| 116 | 8 | 377.8 | 10.7 | |||||
| 146 | 10 | 331.9 | 9.4 | |||||
| SGPM 55I | B7 | 6 | 5014 | 14.2 | 55/75 | 2380*1300*1590 | 1750 | DN50 |
| 102 | 7 | 483.7 | 13.7 | |||||
| 116 | 8 | 448.4 | 12.7 | |||||
| 145 | 10 | 413.1 | 11.7 | |||||
| SGPM 751 | 87 | 0 | 600.3 | 17.0 | 75/100 | 2900*1650*1850 | 2650 | DN80 |
| 102 | 7 | 582.6 | 16.5 | |||||
| 116 | 8 | 568.5 | 16.1 | |||||
| 145 | 10 | 452.0 | 128 | |||||
| SGPM 901 | 87 | 6 | 829.8 | 23.5 | 90/120 | 2900*1650*1850 | 2680 | DN80 |
| 102 | 7 | 787.4 | 22.3 | |||||
| 116 | 8 | 727.4 | 20.6 | |||||
| 145 | 10 | 653.2 | 18.5 | |||||
| SGPM 1101I | 87 | 6 | 918.1 | 26.0 | 110/150 | 2900*1650*1850 | 2700 | DN80 |
| 102 | 7 | 8828 | 25.0 | |||||
| 116 | 8 | 847.4 | 24.0 | |||||
| 145 | 10 | 776.8 | 22.0 | |||||
| SGPM 132II | 87 | 6 | 1059.3 | 30.0 | 132/175 | 3100*1800*1950 | 3340 | DN80 |
| 102 | 7 | 1034.6 | 29.3 | |||||
| 116 | 8 | 988.7 | 28.0 | |||||
| 145 | 10 | 865.1 | 24.5 | |||||
| SGPM 1601I | 87 | 6 | 1253.5 | 35.5 | 160/200 | 3100*1800*1950 | 3360 | DN80 |
| 102 | 7 | 1218.2 | 34.5 | |||||
| 116 | 8 | 1193.5 | 33.8 | |||||
| 145 | 10 | 1094.6 | 31.0 | |||||
| SGPM 185II | B7 | 6 | 1447.7 | 41.0 | 185/260 | 3600*1900*2050 | 4400 | CN10D |
| 102 | 7 | 1359.4 | 38.5 | |||||
| 116 | 8 | 1271.2 | 36.0 | |||||
| 145 | 10 | 1129.9 | 32.0 | |||||
| SGPM 200I | 87 | 6 | 1483.0 | 42.0 | 200/268 | E900*1600*8090 | H00 | DN100 |
| 102 | 7 | 1447.7 | 41.0 | |||||
| 116 | 8 | 1412.4 | 40.0 | |||||
| 145 | 10 | 1218.2 | 34.5 | |||||
| SGPM 220II | 102 | 6 | 1765.5 | 50.0 | 220/300 | 4100*2255*2300 | 5120 | DN125 |
| 116 | 7 | 16419 | 46.5 | |||||
| 146 | 8 | 1589.0 | 45.0 | |||||
| 174 | 10 | 1412.4 | 40.0 | |||||
| SGPM 250II | 102 | 6 | 2048.0 | 58.0 | 250/350 | 4100*2255*2300 | 5120 | DN125 |
| 116 | 7 | 1942.1 | 55.0 | |||||
| 145 | 8 | 1871.4 | 53.0 | |||||
| 174 | 10 | 1589.0 | 45.0 | |||||
Q1: What is the rotor speed for the air end?
A1: 2980rmp.
Q2: What's your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)
Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).
Q4: What's the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.
Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.
Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.
Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.
Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.
Q9: Do you have spare parts in stock?
A9: Yes, we do.
Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.
