Audited Supplier
HJ-65
Lifetime Maintenance
1 Year
Drop Testing Machine
<1000KN
0.5
Electronic Load
Lock Test Machine
Computer Control
0-100Kg
AC220V
Non-Standard Customization
2 Station
W550×d450×h500mm
Power Supply
Hongjin
Fumigation-Free Standard Export Wooden Box
China
Product Description
Simplex intelligent lock life testing machine
Product Overview:
1, the equipment according to the European standard EN12209 durable operation requirements.
2. Equipment dimensions: 750X550X1500mm (with chassis toolbox)
3. Clip the lock one at a time.
4. The key opens at any Angle (Delta servo motor controls the opening Angle). The strength of the motor can be set by the user. Avoid breaking the key when the lock core is stuck due to excessive force.
5, the rotation of the handle, ball or knob uses a stepper motor.
6. The stepper motor is used to drive the screw (Taiwan imported silver wire rod and TBI navigation), and the maximum insertion and removal distance is 60MM, and the insertion and removal speed and depth are adjustable (the key can be completely removed from the lock core, and the inserting and removing accuracy of the key can be controlled within 0.02MM).
7. The control part is controlled by Delta PLC and equipped with a 7-inch touch screen to change parameters.
8. High-precision safety protection device, shutdown protection function in case of failure, and memory function.
9. Surface treatment for baking paint, fixture plating.
10. Increase weights and load functions according to European standards (10N, 25N, 50N, 120N, four levels).
11. International test methods can also be fully used.
Product parameter table:
Product Overview:
1, the equipment according to the European standard EN12209 durable operation requirements.
2. Equipment dimensions: 750X550X1500mm (with chassis toolbox)
3. Clip the lock one at a time.
4. The key opens at any Angle (Delta servo motor controls the opening Angle). The strength of the motor can be set by the user. Avoid breaking the key when the lock core is stuck due to excessive force.
5, the rotation of the handle, ball or knob uses a stepper motor.
6. The stepper motor is used to drive the screw (Taiwan imported silver wire rod and TBI navigation), and the maximum insertion and removal distance is 60MM, and the insertion and removal speed and depth are adjustable (the key can be completely removed from the lock core, and the inserting and removing accuracy of the key can be controlled within 0.02MM).
7. The control part is controlled by Delta PLC and equipped with a 7-inch touch screen to change parameters.
8. High-precision safety protection device, shutdown protection function in case of failure, and memory function.
9. Surface treatment for baking paint, fixture plating.
10. Increase weights and load functions according to European standards (10N, 25N, 50N, 120N, four levels).
11. International test methods can also be fully used.
Product parameter table:
| Test station | 2 station |
| frequency | Simultaneously run 0-999999 times can be set |
| Test speed | 5-60 times 1 minute adjustable |
| Open test Angle | 0-99999. |
| Residence time | 1 ~ 999sec (optional) |
| Control mode | Touch screen PLC |
| volume | W550×D450×H500mm |
| weight | 30kg |
| Power supply | AC220V,50Hz 3A |
