Audited Supplier
ZR-ECB-N-01-12DC/10
Low Voltage Circuit Breakers
Electric Type
High-Speed Circuit Breaker
DC Production
Fixed
Ecb
DC Production
Circuit Breaker
Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
CE
IP20
<1ms
Dry Contact
PA66
ZERO
Box
90*6*72
China
Product Description
Miniature Circuit Breaker DC Current Protection Electronic
Our single channel electronic device protector is ideal solution for selective protection of system components in DC applications. Its width is only 6mm, greatly saving space in the cabinet. The single channel DC electronic circuit breaker has an adjustable output current range of 1-10A, which can be flexibly adjusted according to different load requirements. Electronic circuit breakers not only support dry node signals, but are also compatible with Modbus serial communication, allowing you to remotely read data and control it.
- - 24V DC power supply output side
- - 24v DC current distribution
- - Protect for PLC, solenoid valve, sensor, actuator, etc
ZR - ECB - N - 01 - 24DC / 10
1 2 3 4 5 6
| 1 | Code | ZR: ZERO |
| 2 | Series Code | ECB: Electronic circuit breaker |
| 3 | Communication Method | N: Dry contact normally closed output |
| M: MODBUS 485 communication only | ||
| 4 | Number of Channels | 01: This type has only one channel |
| 5 | Rated Voltage | 24DC: 24V DC(12V, 48V is Optional) |
| 6 | Current Rating | 10: Rated current 10A, it can be selected 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 (If 6A is optional, set parameters 1, 2, 3, 4, 5, and 6A) |
| Model Number | ZR-ECB-01-12VDC/10-000 | ZR-ECB-01-24VDC/10-000 |
| Installation Type | Standard DIN35mm rail mounting, 1 bit | |
| Type of Product | Device (overload) circuit breaker | |
| Protection Channel | 1 | |
| Insulation Protection Class | 3 | |
| Level of Pollution | 2 | |
| Width | 6mm | |
| Height | 90mm | |
| Depth | 72mm (including DIN7.5mm type guide rail) | |
| Operating Voltage Range | 9VDC---15VDC | 18VDC---30VDC |
| Rated Operating Voltage | 12VDC | 24VDC |
| Total Fixed Current | Max.10ADC (DC IN) | |
| Single Channel Rated Current | Less than 10A | |
| Main Power Input | For example, DC 12V+ | For example, DC 24V+ |
| Main Loop Ground | GND | |
| Single Control Output | DC (+) terminal device input, each channel is the same | |
| Single Road Common Ground | The DC (-) ground terminal is connected to the device in common ground | |
| Relay Dry Junction Output | Normally closed | |
| RS485 Communication Line | Slave, connected to the master controller (such as PLC) | |
| Jumper (Connector) Model | TJA6.2 | |
| Preset Current | 1-10A | |
| Rated Surge Voltage | 0.5 KV | |
| Type of Tripping | E (electronic type) | |
| Product Power Consumption | The static value is less than 0.5W | |
| Module Initialization Time | The power on time is less than 50ms | |
| Cooldown Time After Shutdown | Less than 30 S | |
| Current Measurement Error | Less than 5% | |
| MTBF (IEC61709, SN29500) | Product life 600Kh | |
