Audited Supplier
SONTUOEC Single Phase 220V 500VA high Accurate Full AC Automactic Voltage Regulator
Function:
The voltage regulator is a continuously adjustable autotransformer with a turns ratio. When the voltage regulator brush slides along the polished surface of the coil by means of the hand wheel main shaft and the brush holder, the turns ratio can be continuously changed. Thereby the output voltage is smoothly adjusted from zero to the previous high.
Adaptation:
The series regulators are characterized by non-distortion waveform, small size, light weight, high efficiency, convenient use, reliable performance and long-term operation. They are used for voltage regulation, temperature control, dimming, power control, etc. , metallurgical instrumentation, electromechanical manufacturing, light industry, scientific experiments, utilities, household appliances, temperature control, dimming, and power control, etc., is an ideal AC voltage regulator.
1.Ambient temperature: maximum temperature + 40 ºC, minimum temperature -15 ºC
2.Altitude: The altitude where the regulator is installed does not exceed 1000 meters
3.Relative air humidity: The monthly average relative humidity of a wet month is 90%, and the average temperature of the month is 25 ºC Power supply voltage waveform:
4.The power supply voltage waveform is a sine wave or similar to a sine wave The installation site is free from gases, vapors, chemical deposits, dust, dirt and other explosive and aggressive media that seriously affect the insulation of the regulator.
5.The installation place should be free of severe vibrations and bumps.
6.Indoor use.
Note! -Selection:Tips This regulator product cannot be used in parallel.
One series: from: 500VA to 10000VA series ; Single Phase
| Model | SVC-500VA | |
| Power | 500VA | |
| Technology | CPU based Digital Circuit + Motor | |
| Input | Input Voltage Range | 130V-250V |
| Input Frequency | 50/60Hz | |
| Output | Output Voltage | 220Vac |
| Output Precision | ±3% | |
| Efficiency | 98% | |
| Phase | Single Phases | |
| LCD Display Status | Input Voltage/Output Voltage | |
| LCD Display Status | Blue LCD;Indicating phase A,B and C input voltage and output voltage | |
| Press the switch for 2Second, the LCD display will change to show the PDR's running status, including | ||
| Transformer's temperature for each phase, normal / abnormal | ||
| Protection | High Voltage Protection | Yes |
| Low Voltage Protection | Yes | |
| Overload Protection | Yes | |
| High Temperature Protection | Yes | |
| Circuit Protection | Circuit Breaker | |
| Smart Cooling System | Yes | |
| Safety Standards | N/M | |
| Operating Conditions | Operating Temperature | -10ºC~+40ºC |
| Storage Temperature | -15-45°C | |
| Operating Relative Humidity | 10%RH-102%RH,Non-condensing | |
| Dimension | Machine Size(mm) | |
| Unit Weight(kgs) | ||
| Output Deviance | 1-3%(Adjustable) |
| Frequency | 50/60Hz |
| Efficiency | ≥98% |
| Response Time | ≤1S |
| Insulation Resistance | ≥5MΩ |
| Overload | Double Reted Current,One Min |
| Waveform Distortion | Non-Lack Fidelity Wareform |
| Protect | Overvoltage,Overcurrent,Lack Phases |
Competitive points:
1. Volume is smaller than traditional device; Easy to move and install with 4 wheel.
2. With Phase-sequence protection in order to avoid connecting wire wrong;
