Audited Supplier
JK-2×1.5/20
Tower Crane
Electric Hoist
Wire Rope
>8m/min
>20m
1-4
ISO9001:2000
New
as Your Requirement
Mine Hoist
More Than 500m
ISO9001
Container
citichl
in Container
diameter 2m width 1.5-1.8m
China
8474209000
Product Description
Single rope mine drum winder for copper mining
Brief introduction of mine hoist:
Mine hoist can be divided into two kinds; one kind is JKE series single rope mining hoist and the other is Multi-rope friction hoist.
This series mine hoist including 2m-5m single tubular and double tubular types, and can be used for mining hoist, personnel lifting and material and equipment descending from vertical shafts or inclined shafts of coal, metal and nonmetal ores.
JK mine hoist is mainly used in inclined roadways and wells of coal mines, metal mines and non-metal mines to hoist or lower personnel and materials.
Technical parameter of single rope mine hoist:
Brief introduction of mine hoist:
Mine hoist can be divided into two kinds; one kind is JKE series single rope mining hoist and the other is Multi-rope friction hoist.
This series mine hoist including 2m-5m single tubular and double tubular types, and can be used for mining hoist, personnel lifting and material and equipment descending from vertical shafts or inclined shafts of coal, metal and nonmetal ores.
JK mine hoist is mainly used in inclined roadways and wells of coal mines, metal mines and non-metal mines to hoist or lower personnel and materials.
Technical parameter of single rope mine hoist:
| Model | Drum | Tension PF | Tension Differe | Rope Diameter | Lift height (m) | Max Speed | Reduce speed ratio | Motor Speed | ||||||
| N u m b e r | Dia | Width | 1-layer | 2-layer | 3-layer | |||||||||
| m | KN | mm | m | m/s | r/min | |||||||||
| JK-2×1.5/20 | 1 | 2.0 | 1.5 | 62 | 24 | 305 | 650 | 1025 | 5.2 | 20.0 | 1000 | |||
| JK-2×1.5/31.5 | 31.5 | |||||||||||||
| JK-2×1.8/20 | 1.80 | 375 | 797 | 1246 | 20.0 | |||||||||
| JK-2×1.8/31.5 | 31.5 | |||||||||||||
| JK-2.5×2/20 | 2.5 | 2.00 | 83 | 28 | 448 | 945 | 1475 | 5.0 | 20.0 | 750 | ||||
| JK-2.5×2/31.5 | 31.5 | |||||||||||||
| JK-2.5×2.3/20 | 2.30 | 525 | 1100 | 1712 | 20.0 | |||||||||
| JK-2.5×2.3/31.5 | 31.5 | |||||||||||||
| JK-3×2.2/20 | 3.0 | 2.20 | 135 | 36 | 458 | 966 | 1513 | 6.0 | 20.0 | |||||
| 2JK-2×1/11.2 | 2 | 2.0 | 1.00 | 62 | 40 | 24 | 182 | 406 | 652 | 7.0 | 11.2 | |||
| 2JK-2×1/20 | 20.0 | |||||||||||||
| 2JK-2×1/31.5 | 31.5 | |||||||||||||
| 2JK-2×1.25/11.2 | 1.25 | 242 | 528 | 838 | 11.2 | |||||||||
| 2JK-2×1.25/20 | 20.0 | |||||||||||||
| 2JK-2×1.25/31.5 | 31.5 | |||||||||||||
| 2JK-2.5×1.2/11.2 | 2.5 | 1.20 | 83 | 65 | 28 | 843 | 8.8 | 11.2 | ||||||
| 2JK-2.5×1.2/20 | 20.0 | |||||||||||||
| 2JK-2.5×1.2/31.5 | 31.5 | |||||||||||||
| 2JK-2.5×1.5/11.2 | 2.5 | 1.50 | 83 | 65 | 28 | 319 | 685 | 1080 | 8.8 | 11.2 | ||||
| 2JK-2.5×1.5/20 | 20.0 | |||||||||||||
| 2JK-2.5×1.5/31.5 | 31.5 | |||||||||||||
| 2JK-3×1.5/11.2 | 3.0 | 135 | 90 | 36 | 289 | 624 | 994 | 10.5 | 11.2 | |||||
| 2JK-3×1.5/20 | 20.0 | |||||||||||||
| 2JK-3×1.5/31.5 | 31.5 | |||||||||||||
| 2JK-3×1.8/11.2 | 1.80 | 362 | 770 | 1217 | 11.2 | |||||||||
| 2JK-3×1.8/20 | 20.0 | |||||||||||||
| 2JK-3×1.8/31.5 | 31.5 | |||||||||||||
| 2JK-3.5×1.7/11.2 | 3.5 | 1.70 | 170 | 115 | 40 | 349 | 746 | - | 12.6 | 11.2 | ||||
| 2JK-3.5×1.7/20 | 20.0 | |||||||||||||
| 2JK-3.5×2.1/11.2 | 2.10 | 450 | 950 | - | 11.2 | |||||||||
| 2JK-3.5×2.1/11.2 | 20.0 | |||||||||||||
| 2JK-4×2.1/10 | 4.0 | 245 | 160 | 48 | 421 | 891 | - | 12.6 | 10.0 | 600 | ||||
| 2JK-4×2.1/11.2 | 11.2 | |||||||||||||
| 2JK-4×2.1/20 | 20.0 | |||||||||||||
| 2JK-5×2.3/10 | 5.0 | 2.30 | 280 | 180 | 52 | 533 | - | - | 12 | 10.0 | 500 | |||
| 2JK-5×2.3/11.2 | ||||||||||||||
