Audited Supplier
Skin Safe FDA Liquid Silicone Rubber for Silicone Mask Doll Realisticmainly applys to making sex toys , bra, mask ect, and also can be make nipples, glass, Artificial face, ears, hands made by liquid silicone and other kinds of molds.
Skin Safe FDA Liquid Silicone Rubber for Silicone Mask Doll RealisticThe color can be adjusted according to your requirement.
| Item | Mixing Ratio | Color | Hardness(shore A) | Viscosity (mPa.s) | Working Time (25ºC) | Curing Time (25ºC) | Tear-Strength (kN/m) | Tensile- Strength (Mpa) | Elongation (%) | Shrinkage(%) |
| OTT-R200 | 1:1 | translucent | 0 | 1500±800 | 20-40mins | 3-5h | ≥3 | ≥1.5 | ≥400 | ≤0.1 |
| OTT-R205 | 1:1 | translucent | 5±2 | 2000±1000 | 20-40mins | 3-5h | ≥10 | ≥2.0 | ≥400 | ≤0.1 |
| OTT-R210 | 1:1 | translucent | 10±2 | 3000±1000 | 20-40mins | 3-5h | ≥13 | ≥3.0 | ≥400 | ≤0.1 |
| OTT-R215 | 1:1 | translucent | 15±2 | 4000±1000 | 20-40mins | 3-5h | ≥15 | ≥4.0 | ≥400 | ≤0.1 |
| OTT-R220 | 1:1 | translucent | 20±2 | 5000±1500 | 20-40mins | 3-5h | ≥20 | ≥5.0 | ≥450 | ≤0.1 |
| OTT-R520 | 1:1 | translucent | 20±2 | 20000±5000 | 5-10mins | 0.5-1h | ≥16 | ≥5.4 | ≥500 | ≤0.1 |
| OTT-R525 | 1:1 | translucent | 25±2 | 25000±5000 | 5-10mins | 0.5-1h | ≥15 | ≥5.0 | ≥400 | ≤0.1 |
| OTT-R530 | 1:1 | translucent | 30±2 | 25000±5000 | 5-10mins | 0.5-1h | ≥15 | ≥5.5 | ≥400 | ≤0.1 |
| OTT-R535 | 1:1 | translucent | 35±2 | 25000±5000 | 5-10mins | 0.5-1h | ≥15 | ≥6.0 | ≥400 | ≤0.1 |
Packing: 20kg/25kg/200 kg per drum
Shipping: by air & by sea
Delivery time: within 3-5 days after your payment confirmed in our bank
1.Stir part A 100g and part B 100g with 1:1 mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuum machine, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates
3. Clean your products and brush a layer of release agent (detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame. After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.
Note: the time for vacuum-pumping should be less than 3-5mins, otherwise, once the silicone rubber has cross-link reaction during
1. What's silicone products you are making?
--liquid silicone, silicone rubber, silicone oil; Due to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team to control the quality during production. Goods will be 100% inspected before shipment.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is: #A, Please choose the right liquid silicone according to your products. #B, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use. #C, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
