Audited Supplier
CNC Rotary Table HF-160 Advantages
1:The lowest cost machine tool transformation method allows for a wider range of applications for machining center. we can install CNC rotary table on machining center for you to realize processing your workpiece in 360 degree.
2:High precision. Adopting high-precision and high-performance servo motor drive, the transmission mechanism uses high-precision reducer; Combined with a laser interferometer for back gap compensation, high-precision segmentation can be achieved with extremely high precision.
3:High speed and Low noise. Fast response and high speed greatly improve machining efficiency, coupled with high-precision reducers to further ensure machining accuracy.
4:Security and Reliable. Communication protocol with machine tool system interaction, consistent safety signal response.
| 5axis Rotary Table (HF160) main technical parameters | ||||
| Table Diameter | mm | 160 | ||
| Center Hole Diameter | mm | 20 | ||
| Center Height | mm | 125 | ||
| Disk Height | mm | 190 | ||
| Reduction Ratio | A-axis | C-axis | ||
| 80 | 121 | |||
| Max Speed | rpm | 24 | 37 | |
| Indexing Accuracy | sec | 30'' | 30'' | |
| Repeat Accuracy | sec | 10'' | 10'' | |
| Motor Power | W | 750 | 400 | |
| Output Torque | Nm | 310 | 85 | |
| Locking Method | Kg/cm³ | - | - | |
| Locking Torque | Nm | -- | - | |
| Rotation Angle | deg. | ±110 | 360 | |
| Min Increment | deg. | 0.001 | 0.001 | |
| Max Load | 0° | kg | 30 | |
| 90° | kg | 18 | ||
| Table Weight | kg | 66 | ||
