Audited Supplier
Shaking table Introduction
Shaking table is one of the main equipment of gravity concentration, it is widely used in separating gold, tungsten, tin,tantalum, niobirm and other rare metals and precious metal ore.Shaking table can be used to deal with many kinds of metal ores,such as rough selection, elaborate selection, and scavenging. It also can select and sort coarse sand (2-0.5mm), fine sand(0.5-0.074mm), slime (-0.074) and other different particle sizes. What is more, shaking table can be used for sorting iron,manganese ore and coal. When dealing with tungsten, tin and other minerals,its effective recovery size is 2-0.02 mm. 40/60/88/120 riffles available.Working Principle
The electric motor of the shaker drives the belt pulley to drive the crankshaft of the shaker device to move up and down by mean of a belt drive. When the rocker moves downwards, the mineral material enters through the groove in the inclined table surface of the double bar. Provide lateral impact water so that one side vibrates while rinsing. Specific gravity and particle size. Minerals with different densities flow out of the finer ore end of the bed and tailings in different directions,directly forming high quality concentrates due to ore With the replacement of the shaker, the equipment has greatly improved in terms of throughput and accuracy.
Marketing Countries: We have provided the gold shaking table for many customers
such as from in South africa, Mali, Sudan, Mozambique, Nigeria, Vietnam, Ghana, Uganda, Zambia, Tanzania, Angola, Canada, Thailand, Chile, Peru, USA, Australia ect. For Alluvial chrome ore plant, copper ore plant, gold ore plant, iron ore plant, manganese ore plant, Silver ore plant, tin ore plant, tungsten plant ect.
| Model | 4LZYG | 3LZYG | LZYC7.6 | 2LZLY15.2 | LZ6S4500 | LZ6S3000 | LZ6S2100 | LZLY1100 |
| Beneficiation area(m2) | 30.4 | 22.8 | 7.6 | 15.2 | 7.6 | 4.08 | 1.95 | 0.5 |
| layer(piece | 4 | 3 | 1 | 2 | 1 | 1 | 1 | 1 |
| table L (mm) | 4500 | 4500 | 4500 | 4500 | 4500 | 3050 | 2060 | 1100 |
| Transmission W(mm | 1850 | 1850 | 1850 | 1850 | 1830 | 1510 | 1060 | 500 |
| Concentrate W(mm | 1550 | 1550 | 1550 | 1550 | 1550 | 1300 | 930 | 430 |
| feeding size | 2-0.074mm | |||||||
| Capacity (t/h) | 2-6.5 | 1.5-5 | 0.3-1.3 | 0.6-3.6 | 0.3-1.8 | 0.4-1.5 | 0.3-0.8 | 0.05-0.2 |
| density (%) | 15-30 | 15-30 | 20-30 | 18-25 | 15-20 | 10-30 | 10-30 | 10-30 |
| Stroke (mm) | 8/10/12/18/20/22 | 16-22 | 11-16 | 8-16 | 6-30 | 12-28 | 9-17 | |
| Frequency of stroke | 270-360r/min | 240-290 | 250 | 280 | 210-320 | 250-450 | 280-460 | |
| Water consumption(t/h | 0.4-1 | 0.6-1.9 | 0.4-0.7 | 0.4-1.5 | 0.3-1.5 | 0.2-1 | 0.1-0.5 | |
| Power (kw) | 2.2 | 1.5 | 1.5 | 1.5 | 1.1 | 1.1 | 1.1 | 0.55 |
Shicheng Oasis Mineral Equipment Manufacturing Co.,Ltd is an import-export trade enterprise specializing in the production, sale and installation of mineral equipment, environmental protection equipment, hardware and machinery. We awarded CE and ISO9001:2008 international quality management system certification.
1. Our Service:
(1) Select equipment model;
(2) Design and manufacture products according to clients' special requirement;
(3) Train technical personnel for clients.
2. Serivces during the sale:
(1) Pre-check and accept products ahead of delivery;
(2) Help clients to draft solving plans;
(3) Guide clients how to install equipment successfully without problem.
3. After-sale services:
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site.
1.Q: What Information needed to get accurate quotation and proposal?
A:(1). What type is the mining? Is it rock stone? or it is sand?
(2). If rock stone, what is the general particle size(mm) of the raw ore?
(3). What is the handling capacity (tons per hour) you need?
(4) .What is the elements of the raw ore? How much percent % of each minerals?
2. Q: Can we send the mineral samples to you to run the ore-dressing experiments test?
A:Yes, we can run the ore-dressing experiments for our customers. After the test, we will give you the reasonable flowchart, suitable solution and equipment selection. etc. based on the test results.
3.Q: What about warranty of the equipment? Any spare parts supplied? A:The warranty period of OASIS equipment is 12 months. And of course we will supply the spare parts to you for life-long time at lowest cost.
4.Q: The reason you choose OASIS?
A:(1). Professional manufacturer of supplying mining equipment, Ore beneficiation equipment and mining dryers.?
(2). Experienced and professional R&D team and manufacturing team.
(3). Professional sales team consisted of dedicated, dynamic and innovative staff with international version.
(4). Professional logistics service ensuring safety and timely delivery of products all over the world.
