Audited Supplier
sodium heparin
9041-08-1
(C14h25no20s3)N.Xna
Non
Powder
Blood Collection Tubes Additives
White
Yes
High
3 Years
No
Above 99%
3 Years
Over 150iu/Mg
5.0-7.5
Colorless Clarification
Desheng
Bottle
10g/bottle, 50g/bottle
China
30019010
Product Description
Sodium Heparin Salt cas 9041-08-1 Pharmaceutical Chemical Raw Materials
[Product Name] Sodium heparin
[Package Specification] Plastic bottle, 10g/bottle, 20g/bottle, 50g/bottle
[Product Standard] Q/WHDS 003-2016
[Scope of application]
1. This product is applicable to the collection and anticoagulation of blood samples for clinical biochemical examination and emergency biochemical examination, and also applicable to the collection and anticoagulation of blood samples for some hemorheology projects.
2. The use of sodium heparin as an anticoagulant is recommended for the determination of ion content in blood in clinical tests because it is the least likely to interfere with the determination of other ions.
3. This product is not a drug and cannot be used as an injection. Direct injection into human body and animals is prohibited.
[Precautions]
In order to ensure sufficient anti-coagulation of blood, it is necessary to mix the blood upside down for 5-8 times as soon as possible after the completion of blood collection, especially when the ambient temperature of blood collection is higher than 25ºC, the mixing of blood and sodium heparin must be sufficient in time, otherwise it is easy to cause blood coagulation or local coagulation.
Heparin anti-coagulation is not irreversible, so the test should be completed within 6 hours after blood collection in heparin anti-coagulation test tube, otherwise the test results may have errors.
Heparin may be involved in the metabolism of cell enzymes and ions, so the use of heparin may affect the test results. The dosage of heparin should ensure the full anti-coagulation of the whole and local samples, so as to ensure that most of the plasma indexes can be repeated within 6 hours, especially the sensitive indexes such as AST, ALT, TBIL, DBIL and GGT.
Sodium heparin can be used at the same time with the separation gel. Anticoagulant effect, tube wall silicification, centrifugation conditions, separation gel quality and so on will affect the blood separation effect. It is suggested that high quality plasma samples can be obtained by using the blood separation gel produced by our company.It is recommended to use γ - ray irradiation at a dose of 8-25kgy. The irradiation dose can be determined by the initial colony number.
Company Introduction
Hubei New Desheng Material Technology Co., Ltd. specializes in the production of blood collection tube additives, chemiluminescent reagents, biological buffers, chromogenic substrates, enzyme preparations, antigen antibodies and other biochemical reagents. Founded in 2005, Desheng has a professional R&D team and advanced production equipment!
[Product Name] Sodium heparin
[Package Specification] Plastic bottle, 10g/bottle, 20g/bottle, 50g/bottle
[Product Standard] Q/WHDS 003-2016
Sodium heparin powder
[Product Performance] White amorphous powder, odorless, soluble in water, easy to absorb moisture, average molecular weight of 15,000, stable at room temperature. The potency of sodium heparin of our company is ≥150 IU/Mg, and the potency of anhydrous sodium heparin is ≥ 160 IU/Mg. Other indexes were controlled according to sodium heparin standard.[Scope of application]
1. This product is applicable to the collection and anticoagulation of blood samples for clinical biochemical examination and emergency biochemical examination, and also applicable to the collection and anticoagulation of blood samples for some hemorheology projects.
2. The use of sodium heparin as an anticoagulant is recommended for the determination of ion content in blood in clinical tests because it is the least likely to interfere with the determination of other ions.
3. This product is not a drug and cannot be used as an injection. Direct injection into human body and animals is prohibited.
[Precautions]
In order to ensure sufficient anti-coagulation of blood, it is necessary to mix the blood upside down for 5-8 times as soon as possible after the completion of blood collection, especially when the ambient temperature of blood collection is higher than 25ºC, the mixing of blood and sodium heparin must be sufficient in time, otherwise it is easy to cause blood coagulation or local coagulation.
Heparin anti-coagulation is not irreversible, so the test should be completed within 6 hours after blood collection in heparin anti-coagulation test tube, otherwise the test results may have errors.
Heparin may be involved in the metabolism of cell enzymes and ions, so the use of heparin may affect the test results. The dosage of heparin should ensure the full anti-coagulation of the whole and local samples, so as to ensure that most of the plasma indexes can be repeated within 6 hours, especially the sensitive indexes such as AST, ALT, TBIL, DBIL and GGT.
Sodium heparin can be used at the same time with the separation gel. Anticoagulant effect, tube wall silicification, centrifugation conditions, separation gel quality and so on will affect the blood separation effect. It is suggested that high quality plasma samples can be obtained by using the blood separation gel produced by our company.It is recommended to use γ - ray irradiation at a dose of 8-25kgy. The irradiation dose can be determined by the initial colony number.
Company Introduction
Hubei New Desheng Material Technology Co., Ltd. specializes in the production of blood collection tube additives, chemiluminescent reagents, biological buffers, chromogenic substrates, enzyme preparations, antigen antibodies and other biochemical reagents. Founded in 2005, Desheng has a professional R&D team and advanced production equipment!
