Audited Supplier
HXM630I PVC
24 Hours Service Online
24 Months
Plastic Injection Molding
Horizontal
Thermoplastic
Screw Type
Hydraulic & Mechanical
Automatic
Computerized
CE, ISO9001:2008
Servo Energy Saving
Engineers Avaiable to Service Machine
According to Countries
Malaysia,Russia,Turkey,Uzberkistan
New
28.2ton
HIGHSUN
Standard Packing
9.22*2.87*2.61M
China
8477101090
Product Description
HIGHSUN PVC fitting machine, clamping force:218-1100T
- Adopt the special designed screw & barrel for PVC material, install the air fan for cooling barrel, to avoid the material overheating and coking;
- Increased bigger grade oil motor to facilitate PVC raw material plasticizing and molding;
- Enlarge the width of clamping unit cover sheet, to suit PVC fitting molds (core puller cylinder) installation convenience;
- Supply with special technical solution for PVC injection, not only modify the screw & barrel like others, but also the special solution contains complete hydraulic system and injection unit.
| HX(*)630PVC | ||
| Injection Unit | ||
| Screw diameter | mm | 80 |
| Screw L/D ratio | L/D | 21.3 |
| Injection capacity in theory | cm³ | 2110 |
| Injection weight(PVC) | g | 2532 |
| Injection pressure | MPa | 168 |
| Injection rate | g/s | 558 |
| Plasticizing capacity | g/s | 74 |
| Screw speed | rpm | 130 |
| Clamping Unit | ||
| Clamping force | KN | 6300 |
| Moving mould-plate stroke | mm | 870 |
| Max.Mould height | mm | 900 |
| Min.Mould height | mm | 350 |
| Space between tie-bars | mm | 900x850 |
| Hydraulic ejector force | KN | 200 |
| Hydraulic ejector stroke | mm | 260 |
| Ejector number | n | 17 |
| Other | ||
| Pump pressure | MPa | 16 |
| Motor/Driving power | KW | 30x2 |
| Heating capacity | KW | 28.85 |
| Machine dimension | m | 9.22*2.87*2.61 |
| Machine weight | t | 28.2 |
| Oil tank capacity | L | 1156 |
