Audited Supplier
KN4006
Refined Oil
High Temperature Resistance
Naphthenic Base
Liquid
Raw Materials, Sole, Rubber Material TPR, TPE, SBR, EPDM, Seal
Distillation
Drum
Viscosity
+30, Colorless, Transparent, Crystal Clear
Less Than 3
Less Than 10
Yes
Naphthene
III Grade Hydrogenation, Deeply Refined
HRPC
Drum, IBC Tank, Flexitank, Liquid Container
170kg, 850kg, 20t
China
3812200000
Product Description
Soft Rubber Products Footware Raw Material Thermoplastic Elastomer Oil - KN4006
2) Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and suitable appropriate solubility 3) Stable carbon skeleton, reasonable hydrocarbon composition 4) The product is highly refined and keeps good solubility with rubberDeeply refined, good intermiscibility with rubber.
4. Product Consideration
All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
Storage & preservation: It must be placed in cool and ventilated place. Insolation and moisture are prohibitied.
5. Product Application
The oil can be applicated to sealing, seal ring, batten, pad, rubber products, household products (toothbrush handle), sole sole material (TPR,TPE,SBR), toner, color master batch.
6. Product Packing
7. Contact
1. Product Introduction
The product takes karamay Sinkiang low condensate naphthenic crude oil as the raw material, through the atmospheric vacuum distillation cutting out the appropriate fraction, then through via the high pressure hydrogenation device to refine and then and produce the ultimate aim product: refining produces the final purpose product.
2. Product Specification
The above technical parameters only represent the typical data of standardized brand products, the specific products shall be subject to the actual contract provisions.
3. Product Feature
1) Lower pour point and excellent low temperature fluidity, free of any coagulant
The product takes karamay Sinkiang low condensate naphthenic crude oil as the raw material, through the atmospheric vacuum distillation cutting out the appropriate fraction, then through via the high pressure hydrogenation device to refine and then and produce the ultimate aim product: refining produces the final purpose product.
2. Product Specification
| Analysis Items | KN4006 | Test Methods | |
| Appearance | Crystal Clear | Visual Test | |
| Seibert Color | ≮+30 | GB/T3555 | |
| Kinematic Viscosity (40ºC),mm2/s | Report | GB/T 265 | |
| Kinematic Viscosity (100ºC),mm2/s | 5.0~7.0 | GB/T 265 | |
| Density (20ºC),kg/m3 | Report | GB/T 1884 | |
| Flash Point,(Opening),ºC | ≮185 | GB/T 3536 | |
| Pour Point,ºC | ≯-18 | GB/T 3535 | |
Carbon Type Analysis % | CA | ≯1 | SH/T 0725 |
| CN | ≮40 | ||
| CP | Report | ||
The above technical parameters only represent the typical data of standardized brand products, the specific products shall be subject to the actual contract provisions.
3. Product Feature
1) Lower pour point and excellent low temperature fluidity, free of any coagulant
2) Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and suitable appropriate solubility
4. Product Consideration
All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
Storage & preservation: It must be placed in cool and ventilated place. Insolation and moisture are prohibitied.
5. Product Application
The oil can be applicated to sealing, seal ring, batten, pad, rubber products, household products (toothbrush handle), sole sole material (TPR,TPE,SBR), toner, color master batch.
6. Product Packing
7. Contact
