Audited Supplier
The Roof Ballast Solar Mounting System is a flat roof racking system. This ballast system can also be used for installation on pitched roofs or flat ground. It has the advantages of low price and convenient and quick installation.
Wintop ballast mounting systems are designed by experienced engineers to withstand extreme weather conditions according to AS/NZS 1170 and other international common standards. The main load-bearing components of the system have undergone various tests to ensure their structural load-carrying capacity.
| Installation location | Low angle rooftop or outdoor |
| Installation foundation | Concrete foundation |
| Installation angle | 5°-35° |
| Wind load | 60m/s(216kmh/133mph) |
| Snow load | 1.4KN/m² |
| Distance from module lowest point to the ground | Roof height |
| Applicable module type | Mono-crystalline, Poly-crystalline, Double wave and Thin film |
| Module Orientation | Horizontal, Vertical |
| Design standard | AS/NZS1170,JIS C 8955-2017 |
| Bracket material | AL6005-T5(Anodized Oxidation) |
| Fastener Material | Stainless steel SUS304 |
| Warranty&Duration | 10 years&More than 20 years |
- High corrosion resistance and salt tolerance;
- Fixed with concrete ballast to achieve strong wind resistance;
- Specific bottom rail design;
- Flexible installation;
- Horizontal and vertical. Structure can be adjusted according to demand;
- Many solutions to meet different customers' requirements;
- Good wind resistance, strong reliability, and no damage to the roof waterproof structure;
- The construction method is simple, and the bracket can be installed at the same time when making the counterweight, saving construction time.
Xiamen Wintop New Energy Tech. Co. Ltd was established in 2016, it is a high-tech enterprise that integrates R&D, production and marketing of Solar Mounting System for residential, commercial and utility scale customers.
(1) Will the solar panels cause my roof to leak?
No, all of our mounting solutions are professionally engineered, guaranteed to ensure the integrity of your roof.To prevent water intrusion on shingled roofs, we use metal flashing kits that create a watertight seal every time.
(2) Where is your factory located?
Our factory address is : No.585, HongTang Road, TongAn District,Xiamen,City,Fujian,P.R.China.
(3) How can I get to your factory?
When you arrive in the Xiamen International Airport,then we can pick you up there,and next visit our head office and factory.
(4) If i will need to stay in your place for few days, is that possible to book the hotel for me?
It's always my pleasure, hotel booking service is available.
(5) What is your minimum order quantity, can you send me samples?
Our minimum quantity is 1 set, and Yes it is acceptable to send you samples if you need,then you just need to pay the shipping fee of the samples.If you need,please feel free to send your inquiry to me.
