Audited Supplier
ZS-Solar
Online Support,Send Technician
18 Months
1.5-2.5mm
Electrical
CRC,HRC
Gcr15
23steps
41*21mm,41*41mm,41*62mm
PLC
Hydraulic/Flying Saw
75mm/80mm
10-15m/Min
22kw
Chain/Gearbox
Container
40 feet
China, Cangzhou
84552210
Product Description
Solar Panel Frame Roll Forming Machine
The Solar Panel Mounting Bracket Profile Roll Forming Machine is a cutting-edge device meticulously designed for the high-efficiency mass production of solar panel mounting bracket profiles. Tailored for seamless placement, installation, and securing of solar panels in photovoltaic power generation systems, this machine fully automates the manufacturing process. These robust solar photovoltaic brackets are typically composed of premium-grade materials such as aluminum alloy, carbon steel, and stainless steel.
Our solar support system components are masterfully crafted from carbon steel and stainless steel. The carbon steel surfaces are hot-dip galvanized, ensuring the material remains corrosion-free for up to 30 years, even in the most extreme outdoor conditions.
The solar photovoltaic mounting system features an innovative design that eliminates the need for welding and drilling. It offers 100% adjustability and reusability, making it an exceptionally versatile and cost-effective solution for a wide range of solar panel installations.
Profiles:
Material:
Effective Width: 41mm
Effective Width Tolerance: ±0.5mm
Material Thickness: 1.5-2.5mm
Length Tolerance: ±1mm (4m)
Applicable Material: Galvanized Sheet (GI)
Inspection Thickness: 2.0mm
Cold Roll Steel (CRC)
Yield Strength: 235Mpa to 550Mpa
Working Flow:
Decoiler → Leveling Device → 63 Tons Servo Motor Punching Machine → Roll Forming System
→ Fly SawCutter→ Exit Rack
Weight Capacity: 3 Tons Electrical Decoiler with Flattening: One Set Advanced Electrical Control for Steel Coil Inner Bore Shrinkage and Stop
Max. Feeding Width:600mm
Coil ID Range:508±30mm, Outside Diameter: 1500mm
Max Capacity:5 Tons, Motor Power:3KW, Frequency Speed Control
Max. Feeding Width:600mm
Coil ID Range:508±30mm, Outside Diameter: 1500mm
Max Capacity:5 Tons, Motor Power:3KW, Frequency Speed Control
63 Tons High-SpeedPunching Machine Before Roll Forming, Equipped WithOne Set of Punching Model.
Punching Machine with Four-Sided Safety Cover and One Door Opening Side
Punching Machine with Four-Sided Safety Cover and One Door Opening Side
Die Material: Cr12mov
Hole Punching Capacity: 6 Holes Per Punch
Feeder: Servo Motor with PLC System
Hole Punching Capacity: 6 Holes Per Punch
Feeder: Servo Motor with PLC System
Rollers Manufactured fromBearing Steel GCr15, Precision Machined, Hard Chrome Coated
Shafts Manufactured from45# Steel,Quenching and Tempering Heat Treatment, Hard Chrome Plating. Diameter =φ75/85mmPrecision Machined
Gear & Chain Drive with About23 Stepsto Form
Main Motor Power =22KW,Frequency Speed Control
Speed Reducer Motor:K Series
Product Speed:10-15m/min(Including Punching and Cutting Time)
Shafts Manufactured from45# Steel,Quenching and Tempering Heat Treatment, Hard Chrome Plating. Diameter =φ75/85mmPrecision Machined
Gear & Chain Drive with About23 Stepsto Form
Main Motor Power =22KW,Frequency Speed Control
Speed Reducer Motor:K Series
Product Speed:10-15m/min(Including Punching and Cutting Time)
Non-Stop Servo Motor Following Cutting Enhances Working Speed.
Mould Cutting is Faster, Burr-Free, Clean, and Safe.
Mould Cutting is Faster, Burr-Free, Clean, and Safe.
Sophisticated PLC Control System
Automatically Controls Quantity and Cutting Length
Input Production Data (Batch, Pcs, Length, etc.) on the Touch Screen for Automated Production.
Automatically Controls Quantity and Cutting Length
Input Production Data (Batch, Pcs, Length, etc.) on the Touch Screen for Automated Production.
| Combined With | PLC, Inverter, Touch Screen, Encoder, etc |
| PLC | Siemens (German brand) |
| Inverter | Siemens (German brand) |
| 7-Inch Color Touch Screen | Siemens (German brand) |
| Encoder | Omron (Japan brand)Switch Bottom, Indicate Light, Power Supply, Intermediate Relay, AC Contactor |
| Thermal Relay | Siemens(German brand) |
| Air Switch | LG-LS(Korea brand) Cut-to-Length Tolerance≤±1 mm Control Voltage 24V |
After-Sale Service:
1. Warranty Period:18months from the machine's receipt by the client.
Within 24 months, replacement parts will be couriered to the client free of charge.
2. We offer lifetime technical support for our machines.
3. We can dispatch technicians to install and train workers at the client's factory at an additional cost.
Terms of Trade:
1. Warranty Period:18months from the machine's receipt by the client.
Within 24 months, replacement parts will be couriered to the client free of charge.
2. We offer lifetime technical support for our machines.
3. We can dispatch technicians to install and train workers at the client's factory at an additional cost.
Terms of Trade:
| Minimum order quantity (MOQ) | 1 Set |
| Delivery time | about 60 workdays |
| Port of loading | port of Tianjin |
| Type of payment | by T/T or by L/C |
| Export | to more than 80 countries and regions, including South Korea,Taiwan, UK, Ireland, Greece, Australia, USA, Mexico, Brazil, Russia,Saudi Arabia, UAE, Iran , India, Singapore, Malaysia, Thailand, Indonesia, Philippines, Vietnam, South Africa, Nigeria, Egypt, etc |
Packing Style:
| Packing method | Main body of machine is naked and covered by plastic film(to protect of dust and corrosion), loaded into container and steadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation. |
Our Advantages:
