Audited Supplier
4M310-08
Gas
-20ºC-70ºC
Air
Thread
Pilot Operated
Aluminum Alloy
Ordinary Pressure
Aluminum Alloy
DC/ AC
Safety, Emptying, Drain, Temperature Control, Flow Control
Numur
Industrial Usage
Internal Pilot
5 Port 2 Way
0.15~0.8MPa(21~114 Psi)
1.2MPa (175psi)
IP66
KGSY
Wooden Case
Made in China
Product Description
4M (NAMUR) series 5 port 2 position (512 way) single solenoidvalve & double solenoid valve for pneumatic actuator.lt has4M310,4M320,4M210,4M220 and other type.
1.Internally piloted structure.
2 Structure in sliding column mode: good tightness and sensitive reaction.
3.Double control solenoid valves have memory function.
4. internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life.
5. No need to add oil for lubrication.
6. install in the side plate with the surface upward, which can be used by directly connecting with the actuators.
7.Affiliated manual devices are equipped to facilitate installation and debugging.
8.Several standard voltage grades are optional.
2 Structure in sliding column mode: good tightness and sensitive reaction.
3.Double control solenoid valves have memory function.
4. internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life.
5. No need to add oil for lubrication.
6. install in the side plate with the surface upward, which can be used by directly connecting with the actuators.
7.Affiliated manual devices are equipped to facilitate installation and debugging.
8.Several standard voltage grades are optional.
| Specification | |||||||||
| Mode | 4M210-06 4M220-06 | 4M210-08 4M220-08 | 4M310-08 4M320-08 | 4M310-10 4M320-10 | |||||
| Fluid | Air (to be filtered by 40um filter element) | ||||||||
| Acting | Internal pilo | ||||||||
| Port size [Note1] | n=Out=1/8 | In=1/4 0ut=1/8* | n=Out=1/4" | 0=3/8 out=1/4" | |||||
| Orifice size (CV) [Note4] | 4M210-08,4M220-08 17.0 mm2(CV=1.0 | 4M310-10,4M320-10 28.0 mm²(CV=1.65) | |||||||
| Valve type | 5 port 2 position | ||||||||
| Operating pressure | 0.15~0.8MPa(21~114 psi | ||||||||
| Proof pressure | 1.2 MPa(175 psi) | ||||||||
| Temperature | -20~+70ºC | ||||||||
| Material of body | Aluminum alloy | ||||||||
| Lubrication [Note2] | Not required | ||||||||
| Max.frequency [Note3] | 5 cyclelsec | 4 cyclelsec | |||||||
| Weight (g) | 4M210:220 4M220:320 | 4M310:310 4M320:400 | |||||||
| Note1]PTthread,G thread and NPT thread are available Note2]Once lubricated air is used,continue with same medium to optimise valve lifespan.Lubricants likelSO VG32 or equivalent are recommended Note3]The maximum actuation frequency is in the no-load state Note4]Equivalent orifice S and Cv are all calculated from the flow rate data. | |||||||||
| Coil Specification | |||||||||
| ltem | 4M210,4M220,4M310,4M320 | ||||||||
| Standard Voltage | AC220 | AC110V | AC24V | DC24V | DC12V | ||||
| Scope of Voltage | AC-±15%,DC:±10% | ||||||||
| Power Consumption | 4.5VA | 4.5VA | 5.0VA | 3.0W | 3.0w | ||||
| Protection Grade | P65 (DIN40050) | ||||||||
| Temperature Classification | B Class | ||||||||
| Electrical entry | Terminal,Grommet | ||||||||
| Activating time | 0.05 sec and below | ||||||||
Q & A:1.What products are produced by your factory?
Answer: We, KGSY is a real factory, we produce all kinds of pneuamtic valve accessories, like air actuator, limit switch box, solednoid valve, air filter, declutch gear operator, electro-pneumatic positioner, adapters, etc.
We also assemble whole set pneuamtic ball valves & butterfly valves.
2.What international approval have you got?
Answer: At present, we have been approved with CCC, CE, IECEx, ATEX, UKCA, EAC certificate.
3.How long is the sample time?
Answer: Usually it will take 7 working days to make a sample.
4.How long is the lead time of a mass order?
Answer: We promise 25 days for each order and nearly 99.9% orders will be finished on schedule.
5.What's your strength?
Answer: We are a real factory, we have our own R&D team and control the quanlity and production time absolutly .
At the same time, we own the advantage of a trading company, which includes efficient comunication and strong ability gathering goods on the primese of specialty.
