Audited Supplier
QD-EVU-20
Yes
1 Year
Sludge Dewatering Machine
Combined Treatment
Industrial, Agriculture, Hospital
New
20 Years
Sumitomo Nissei Sew
Long Term
SS304 SS316
Clog Free
Automatic
Low
Less
Customize
85%
10-30kg/H
220V 380V 415V
Chemical Dosing Machine
Spark
Standard Shipping Package
4.5m*1.65m*2.13m
Qingdao China
8421219990
Product Description
QDEVU SLUDGE DEWATERING MACHINIE
WHAT IS THE SLUDGE ?SCREW PRESS SLUDGE TREATMENT PLANTEVU SLUDGE DEWATERING MACHINE ADVANTAGES
SLUDGE TREATMENT PROCESS
QDEVU DEWATERING MACHINE PARAMETER
Dewatering Principle
MAIN FEATURES & COMPARISON
SCREW PRES SLUDGE DEWATERTING APPLICATION
Welcome to our website, a technical information source for sludge treatment and the end disposal of waste sludge solids.
So, what is sludge processing? Watch our brief introduction to sludge treatment ...
Sludge is the main waste stream generated from water purification, both water for drinking and wastewater for environmental discharge. It requires processing to reduce its volume (and so the cost of subsequent haulage and disposal), as well as the risk it poses to public health, and more
Low operation cost: less than 40% of that of belt filter press, and less than 20% of that of centrifugal dewaterer;
Power saving: less than 5% of that consumed by the centrifugal dewaterer; water saving: less than 0.1% consumed by the belt filter press; and medicine saving: saved by 60%
Small volume: save the investment into dewatering room; non-blocking: the strong opponent against oil and fiber sludge;
Power saving: less than 5% of that consumed by the centrifugal dewaterer; water saving: less than 0.1% consumed by the belt filter press; and medicine saving: saved by 60%
Small volume: save the investment into dewatering room; non-blocking: the strong opponent against oil and fiber sludge;
Multi-disk screw press, also known as MDS dewatering press, is a kind of cutting edge sludge dewatering equipment with non-clogging design and low energy consumption, especially applicable for oily sludge.
QDEVU DEWATERING MACHINE PARAMETER
| MODEL | DS STANDARD CAPACITY (KG/H) | FLOW LOAD (M3/H) | |||||
| LOW CONCENTRATION | HIGH CONCENTRATION | 2000MG/L | 10000MG/L | 20000MG/L | 30000MG/L | 50000MG/L | |
| QDLX-131 | 4 | 26 | 26 | 0.6 | 0.5 | 0.87 | 0.4 |
| QDLX-132 | 8 | 52 | 52 | 1.2 | 1.0 | 1.73 | 0.8 |
| QDLX-201 | 8 | 52 | 52 | 1.2 | 1.0 | 1.73 | 0.8 |
| QDLX-202 | 16 | 104 | 104 | 2.4 | 2.0 | 3.47 | 1.6 |
| QDLX-301 | 20 | 130 | 130 | 3.0 | 2.5 | 4.33 | 2.0 |
| QDLX-302 | 40 | 260 | 260 | 6.0 | 5.0 | 8.67 | 4.0 |
| QDLX-303 | 60 | 390 | 390 | 9.0 | 7.5 | 13 | 6.0 |
| QDLX-351 | 40 | 260 | 260 | 6.0 | 5.0 | 8.67 | 4.0 |
| QDLX-352 | 80 | 520 | 520 | 12 | 10 | 17.3 | 8.0 |
| QDLX-353 | 120 | 780 | 780 | 18 | 15 | 26 | 12 |
| QDLX-354 | 160 | 1040 | 1040 | 24 | 20 | 34.68 | 16 |
| QDLX-402 | 135 | 884 | 884 | 20 | 17 | 29.5 | 13.6 |
| QDLX-403 | 200 | 1326 | 1326 | 30 | 25.5 | 44.2 | 20.4 |
| QDLX-404 | 266 | 1768 | 1768 | 40 | 34 | 58.9 | 27.2 |
Dewatering Principle
The initial section of dewatering drum is the thickening zone, where the solid-liquid separating process takes place and where the filrate will also be discharged.The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum, hence increasing its internal pressure. At the end, the end plate further increases the pressure, so as to discharge dry sludge cake.
MAIN FEATURES & COMPARISON
SCREW PRES SLUDGE DEWATERTING APPLICATION
---PAPER MAKING
---LEATHER PROCESSING
---PHARMACY INDUSTRY
---PRINTING & DYEING
---CHEMICAL INDUSTRY
---ELECTROPATING INDUSTRY
---MUNICIPAL PROCESSING
---LEATHER PROCESSING
---PHARMACY INDUSTRY
---PRINTING & DYEING
---CHEMICAL INDUSTRY
---ELECTROPATING INDUSTRY
---MUNICIPAL PROCESSING
