Audited Supplier
Product Description
Feature
Horizontal screw centrifuge is for 0.002-3mm material for clarification, separation, dehydration, or classify 1um-5um solid phased particles. It is wide application range, work continuously, large processing capacity, low cost, convenient maintenance and so on. It is the best equipment for separating solid-liquid
Reference standard
1. Main standard of the national machinery industry.
JB/T502-2004 "spiral discharge sedimentation centrifuge"
JB/T9095-1995 "centrifuge, separator forgings, welding conventional NDT technology standard"
2. The national main standard
GB10894-89 "separation machinery noise sound power level measurement engineering method"
Three-phase horizontal screw centrifuge is mainly composed of driving part, drum and spiral conveyor. Compact structure, small volume, its operation, on the basis of principle of settlement, is solid particles which is heavier than the liquid, in a predetermined time to precipitate out. For both proportion difference and not mutually soluble liquid, can also use the same principle. After the material into the high speed rotating drum. The material inside the drum and the drum synchronous rotation. Due to the different proportion, the centrifugal force of different. Big protection solid particles by the centrifugal force is the largest, then the water, dirty oil minimum, so according to size by centrifugal force outside-in formed a concentric solid concentric layer and two layer. Solid launched by screw conveyor, liquid from their drainage mouth out.
Technical paramete
LW two phase
| Type | Bowl diameter(mm) | Bowl length/ Bowl diameter | Bowl speed | Main Power(Kw) |
| (r/min) | ||||
| LW180 | 180 | 2.5-720 | 6000 | 3-5.5 |
| LW260 | 260 | 3.0-4 | 5000 | 7.5-11 |
| LW355 | 355 | 2-4.5 | 4000 | 1-30 |
| LW420 | 420 | 2-4.5 | 3600 | 18.5-37 |
| LW450 | 450 | 2-4.4 | 3600 | 18.5-37 |
| LW480 | 480 | 2-4.2 | 3200 | 18.5-45 |
| LW500 | 500 | 2-4.2 | 3200 | 18.5-55 |
| LW530 | 530 | 2-4.0 | 3200 | 22-55 |
| LW580 | 580 | 2-4.0 | 2800 | 30-55 |
| LW620 | 620 | 2-4.0 | 2800 | 37-110 |
| LW760 | 760 | 2-3.5 | 2500 | 55-132 |
| Note: In case of differences between the table and the user manual, the latter shall prevail. | ||||
LW three phase
| Type | Bowl diameter(mm) | Bowl length/ Bowl diameter | Bowl speed (r/min) | Main Power(Kw) |
| LWS355 | 355 | 3.3-4.5 | 4000 | 15-18.5 |
| LWS420 | 420 | 4.1 | 3600 | 22 |
| LWS500 | 500 | 4.2 | 3000 | 30 |
| LWS530 | 500 | 4.2 | 3000 | 30 |
| LWS580 | 580 | 4.1 | 2800 | 45 |
| LWS620 | 620 | 4 | 2800 | 45 |
| Note: In case of differences between the table and the user manual, the latter shall prevail. | ||||
Main parts
Application ocasion
Our company
Our Services
1. 12 months guarantee period from machine arrive date.
2. Abundant spare parts in stock are available to provide.
3. Our technicians could be dispatched for overseas service.
4.7* 24 hours technical consultation.
5.Your workers could get trained both in our factory and yours.
6.Routine tracing till the machine work properly will be done timely.
7.We will remind you to do the normal maintenance.
8.Your suggestions or any comments & reflection would be treated in priority.
9.Marketing team will visit you during our visit to your country if your require.
