Audited Supplier
STWD319
319
Texture
Texture
All Color Can Offer
Liquid
Polyurethane
Spray
Finish Coat
Drying
ISO14001, ISO9001
Steel
Film Forming Matter
Conversion Type
STWD
Barrel/Pallet
210L
China
3909310000
Product Description
Product descriptions ,
When the vehicles got collision in the driving process, the vehicle body can easily get damaged and bring risks to the people inside the car. Therefore, it is important to choose a explosion protection material to protect the vehicles. STWD Urethane Co., USA developed explosion protection high strength coating, which has excellent performance of being tough, abrasion resistance and impact resistance. It has been widely used on American armored vehicles, special industry escort vehicles and sport utility vehicles
Characteristics
The product has high reactivity, fast cure, can be sprayed forming on any bent, slope and vertical surfaces without sagging. Surface granulation, nice and feel comfortable. The coating film is dense, seamless, bond well with substrate that greatly increase the adhesive strength. It has excellent explosion protection, impact resistance and anti-collision, to protect the car body and decrease the damage of external force. Spray along with STWD polyaspartic anti-aging topcoat to protect the car body from color-changing, good decoration and safe.
Specifications
Adhesive strength (steel base) 12.3 Mpa
Tear strength 83.6kN/m
Tensile strength 19.5Mpa
Elongation 450%
Penetration resistance 2.6Mpa
Temperature variation -40------+120ºC
Wear resistance (750g/500r) 4.3mg
Acid resistance (10%H2SO4 or 10%HCI, 30d) no rust no bubbles no peel
Alkali resistance 10%NaOH, 30d no rust no bubbles no peel
Salt resistance 30g/L, 30d no rust no bubbles no peel
Salt spray resistance 2000h no rust no bubbles no peel
Oil resistance 0# diesel 30d no rust no bubbles no peel
Data of performance
Color multiple colors as customers' need
Luster glazed
Density 1.01g/cm3
Volume solid content 99% ±1%
VOC 0
Recommended dry film thickness 2000-3000μm
Theoretical coverage 2.04kg/sqm (calculated by the above solids percentage and dry film thickness of 2000 microns)
Practical coverage Allow appropriate loss rate
Dry time 20-30s (Surface fine granulation)
Overcoating interval min: 1h, max: 24h
Overcoating method Special polyurea equipment spray (imported or local support)
Flash point 200ºC
Recommended procedures
Application scope Transportation tools body protection of cars, SUV, buses, trucks, armored vehicles
Shelf life 10 months (Indoor with dry and cool conditions)
Packing Component A: 210kg/bucket, component B: 200kg/bucket
Production places Minhang Shanghai City, and Nantong coastal industrial park production base in Jiangsu (45% of the raw materials imported from STWD US, 40% from multinational company in Shanghai, 15% from local support)
Security To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment protection. Do not even contact the surface of wet coating.
Global applicability Our company aims to provide worldwide customers with standard coating products, however custom adjustments can be made to adapt and leverage different regional conditions and international norms. In this case, additional alternative product data will be provided.
Integrity declaration Our company guarantees the reality of the listed data. Due to the diversity and variability of the application environment, please test and verify it before use. We don't take any other responsibilities except the coating quality self and reserve the right of modifying the listed data without prior notice.
When the vehicles got collision in the driving process, the vehicle body can easily get damaged and bring risks to the people inside the car. Therefore, it is important to choose a explosion protection material to protect the vehicles. STWD Urethane Co., USA developed explosion protection high strength coating, which has excellent performance of being tough, abrasion resistance and impact resistance. It has been widely used on American armored vehicles, special industry escort vehicles and sport utility vehicles
Characteristics
The product has high reactivity, fast cure, can be sprayed forming on any bent, slope and vertical surfaces without sagging. Surface granulation, nice and feel comfortable. The coating film is dense, seamless, bond well with substrate that greatly increase the adhesive strength. It has excellent explosion protection, impact resistance and anti-collision, to protect the car body and decrease the damage of external force. Spray along with STWD polyaspartic anti-aging topcoat to protect the car body from color-changing, good decoration and safe.
Specifications
Adhesive strength (steel base) 12.3 Mpa
Tear strength 83.6kN/m
Tensile strength 19.5Mpa
Elongation 450%
Penetration resistance 2.6Mpa
Temperature variation -40------+120ºC
Wear resistance (750g/500r) 4.3mg
Acid resistance (10%H2SO4 or 10%HCI, 30d) no rust no bubbles no peel
Alkali resistance 10%NaOH, 30d no rust no bubbles no peel
Salt resistance 30g/L, 30d no rust no bubbles no peel
Salt spray resistance 2000h no rust no bubbles no peel
Oil resistance 0# diesel 30d no rust no bubbles no peel
Data of performance
Color multiple colors as customers' need
Luster glazed
Density 1.01g/cm3
Volume solid content 99% ±1%
VOC 0
Recommended dry film thickness 2000-3000μm
Theoretical coverage 2.04kg/sqm (calculated by the above solids percentage and dry film thickness of 2000 microns)
Practical coverage Allow appropriate loss rate
Dry time 20-30s (Surface fine granulation)
Overcoating interval min: 1h, max: 24h
Overcoating method Special polyurea equipment spray (imported or local support)
Flash point 200ºC
Recommended procedures
| No. | Name of products | Layers | Dry film thickness(μm) |
| 1 | STWD polyurea special primer | 1 | 50 |
| 2 | STWD319 special vehicle explosion protection high strength coating | 1 | 2500 |
| 3 | STWD8029 polyaspartic anti-aging coating | 1 | 30 |
| Total | 3 | 2580 |
Shelf life 10 months (Indoor with dry and cool conditions)
Packing Component A: 210kg/bucket, component B: 200kg/bucket
Production places Minhang Shanghai City, and Nantong coastal industrial park production base in Jiangsu (45% of the raw materials imported from STWD US, 40% from multinational company in Shanghai, 15% from local support)
Security To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment protection. Do not even contact the surface of wet coating.
Global applicability Our company aims to provide worldwide customers with standard coating products, however custom adjustments can be made to adapt and leverage different regional conditions and international norms. In this case, additional alternative product data will be provided.
Integrity declaration Our company guarantees the reality of the listed data. Due to the diversity and variability of the application environment, please test and verify it before use. We don't take any other responsibilities except the coating quality self and reserve the right of modifying the listed data without prior notice.
