Audited Supplier
LT-JJ33-A
Yes
1 Year
<1000KN
1
Electronic Load
Dynamic Load
Computer
Computer Control
100-500Kg
AC220V
1kN, 2kN, 3kN, 5kN
±1%
±1%
0 ~ 500mm/Min Stepless
0 ~ 730mm
LITUO
Wooden Case
860*670*1430mm
China
Product Description
Product Description
Sponge foam compaction hardness test machine is also known as sponge compression test machine, foam compaction hardness test machine, metal and non-metal, polymer materials, compression, bending, low cycle fatigue, according to the product requirements according to GB, ISO, ASTM, JIS, EN, etc, can automatically obtain the maximum test force, fracture force, yield, tensile strength, compressive strength, bending strength, elastic modulus, elongation, constant elongation stress, stress and elongation parameters.
Technical Parameter
1. Maximum test pull force: 1 KN, 2 KN, 3 KN and 5 KN
2. Relative value error (not exceeding): ± 1%
3. Displacement relative error: ± 1%
4. Deformation relative error: ± 1%
5. Measurement range: 1% -100% of the whole process volume
6. Displacement speed: 0~500mm / min
7. Effective test trip: 0~140mm
8. Effective test width: 390mm
9. Resolution: 1 / 200,000
10. Control mode: force, displacement,
11. Power supply voltage: 220V 50HZ
12. Outline dimension of the test machine: about 390 * 670 * 950mm
13. Complete machine weight: about 200 Kg
Product Characteristics
1. Automatic zero clearance: After the computer receives the instruction to start the test.
2. Automatic return trip: After the sample is broken, it will automatically return to the original position.
3. Automatic shift: according to the size of the load, different gears can be switched to ensure the measurement accuracy.
4. Change the speed: this machine can change the test speed arbitrarily according to different samples.
5. Display value calibration: the system can realize the accurate calibration of the force value.
6. Control method: According to the test needs, the test force, test speed, displacement, strain and other test methods can be selected.
7. Multi-purpose one machine: equipped with different specifications of sensors, can realize multi-purpose one machine.
8. Curve traversal: After the test is completed, you can use the mouse to find out the force value and deformation data of the test curve arbitrarily, and analyze it.
9. Display: Dynamic display of the data and the curve test process.
10. Results: The test results can be accessed, and the data curve is analyzed.
11. Limit: with programming and mechanical limit.
12. Overload: Automatic stop when the load exceeds the rated value.
Standard
Meet the relevant requirements of GB / T10807-89, ISO 2439-1980 standard.
Sponge foam compaction hardness test machine is also known as sponge compression test machine, foam compaction hardness test machine, metal and non-metal, polymer materials, compression, bending, low cycle fatigue, according to the product requirements according to GB, ISO, ASTM, JIS, EN, etc, can automatically obtain the maximum test force, fracture force, yield, tensile strength, compressive strength, bending strength, elastic modulus, elongation, constant elongation stress, stress and elongation parameters.
Technical Parameter
1. Maximum test pull force: 1 KN, 2 KN, 3 KN and 5 KN
2. Relative value error (not exceeding): ± 1%
3. Displacement relative error: ± 1%
4. Deformation relative error: ± 1%
5. Measurement range: 1% -100% of the whole process volume
6. Displacement speed: 0~500mm / min
7. Effective test trip: 0~140mm
8. Effective test width: 390mm
9. Resolution: 1 / 200,000
10. Control mode: force, displacement,
11. Power supply voltage: 220V 50HZ
12. Outline dimension of the test machine: about 390 * 670 * 950mm
13. Complete machine weight: about 200 Kg
Product Characteristics
1. Automatic zero clearance: After the computer receives the instruction to start the test.
2. Automatic return trip: After the sample is broken, it will automatically return to the original position.
3. Automatic shift: according to the size of the load, different gears can be switched to ensure the measurement accuracy.
4. Change the speed: this machine can change the test speed arbitrarily according to different samples.
5. Display value calibration: the system can realize the accurate calibration of the force value.
6. Control method: According to the test needs, the test force, test speed, displacement, strain and other test methods can be selected.
7. Multi-purpose one machine: equipped with different specifications of sensors, can realize multi-purpose one machine.
8. Curve traversal: After the test is completed, you can use the mouse to find out the force value and deformation data of the test curve arbitrarily, and analyze it.
9. Display: Dynamic display of the data and the curve test process.
10. Results: The test results can be accessed, and the data curve is analyzed.
11. Limit: with programming and mechanical limit.
12. Overload: Automatic stop when the load exceeds the rated value.
Standard
Meet the relevant requirements of GB / T10807-89, ISO 2439-1980 standard.
