Audited Supplier
This machine is widely used in the transport systems of mining, power and chemical industries.
Working principle:
When the running tape is deflected, the tape edge with support rotation and angle, a set of switch signals will be issued immediately, if the stick continues squeeze the stick to make it tilt, if the stick tilt is greater than the first actionto tilt greater than the second action angle, another set of switch signals will be output, two sets of switch signals can be used for alarm or stop, the tape machine back to normal operation, the stick automatically reset.
Installation use:
1.Fix the runout switch on the bracket and weld it to the tape frame.
2.The axis of the vertical stick is perpendicular to the tape plane, and the distance between the vertical stick and the edge of the tape is L=50 100mm.
3. The tape is positioned at the lower 1/3 of the end of the stand.
4.A pair ofrunout switches can be installed for every 50M of tape.
| Product name | Stainless steel Run-off switches | Angle of action | 30°C |
| Product model | HFKPT1-12-30 | Limit angle | 60°C |
| Reset Mode | Manual/Automatic reset | Contact capacity | AC380V 10A |
| Number of contacts | 2NO 2NC | Protection | IP65 |
