1. Introduction:
Thermocouple connectors are designed to connect temperature sensor instrumentation with a temperature controller or process control HMI automation panel, best solution for quick and good contact.
 

Type K

 

 Type J

 

 Type T

 

Type N

 

Type E

2. Wire size 
- Accepts wires from 0.2 mm to 0.8 mm. 
- Maximum cable diameter 4.5 mm. 

3. Max. Temperature 
- 200 Deg. C for thermoplastic body 
- 650 Deg. C for ceramic body

4. Thermocouple Connector Advantages:
Both plastic and ceramic materials body are available.
Pins are polarized.
Original thermocouple alloy material pins,and spring loaded insert.
Solid pins and hollow pins are both available.
Maximum ambient temperature for thermoplastic body continuous usage is 200C.
Well designed body ensures good insulation inside,and well designed pins construct ensures good contact.
Available in all color code standard,ANSI color code standard will be the one if the customer do not have special requirements.

5. Order Code:    1                             2           3         4           5               6
Code Instruction
1  Description                               4 Pins Type        
   P&J : plug and jack                     H: hollow pins
   P: plug only ( male part)            S: solid pins
   J: jack only (female part)
2  Thermocouple types                5 Body material
K, J, E, T, N                                        P:thermoplastic body
3 Dimension:                                 C: ceramic body
S: standard type                              6 Color code
M: mini type                                      Yellow, blue, violet, blue, orange