Audited Supplier
SF320-1800
1 Year
1 Year
New
CE
Automatic
Paper
Normal Specification Paper
Sf320-1800
1800
100m/Min
0-80m /Min
Fingerless
B C E F
320
320
320
11kw
Xinglong
Film
1200/1400/1600/1800mm/2000/2200
China, Hebei
8441309000
Product Description
steam heating single facer 2 ply corrugated cardboard making machine corrugator
Hydraulic Roll stand
1. Symmetrical structure can install two rolls of paper at the same time and continually change paper
2. Full hydraulic control paper roll damp, life-lower, loosen, clamp, left-right movement.
3. Adopts pneumatic tension to adjust basis paper tension 4point brake control paper tension, manual control, also can control tension with splicer together.
NC cut off and stacker
1. Single knife sheet cutter can do set-length cutting reel paper and single facer board, change order fast, high cutting precision, fast work speed, low waste, it also suit for color-printing box package.
2. Adopts adjustable-speed motor reduce the fault caused by transmission wearing.
3. Used high speed flat type knife, high hardness with long use life. Precision adjustable gapless gear ensure accurate mesh, good cutting with high straightness, protect knife
Single facer line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, paper cutting and single tile paper (collect) machine. To use the web paper material, single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board, without drying.
This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low
workmanship, operation and maintenance easy.
This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
| Model | SF280-1800 |
| Working width | 1800 mm |
| Heating way | electric/steam |
| Flute type | A B C D E F |
| Operate direction | Left or right according to customer's factory |
| Designed speed | 100m/min |
| Economic running speed | 0-80m/min |
| Temperature range | 160-200ºC |
| Air source | 0.4-0.8Mpa |
Hydraulic Roll stand
1. Symmetrical structure can install two rolls of paper at the same time and continually change paper
2. Full hydraulic control paper roll damp, life-lower, loosen, clamp, left-right movement.
3. Adopts pneumatic tension to adjust basis paper tension 4point brake control paper tension, manual control, also can control tension with splicer together.
Single facer machine
1. Drive using gimbal drive
2. The glue coating part adopt automatic circulating glue feeding way (manual or electrical isolation device)
3. Pneumatic control to adjust the glue feeding and adjust gluing capacity electrically or manually; the glue parts running separately while the main motor stopped, prevent paste from drying up.
8. It is equipped with the high pressure powerful air fan with the wind capacity adjustable device and silencer
1. Drive using gimbal drive
2. The glue coating part adopt automatic circulating glue feeding way (manual or electrical isolation device)
3. Pneumatic control to adjust the glue feeding and adjust gluing capacity electrically or manually; the glue parts running separately while the main motor stopped, prevent paste from drying up.
8. It is equipped with the high pressure powerful air fan with the wind capacity adjustable device and silencer
NC cut off and stacker
1. Single knife sheet cutter can do set-length cutting reel paper and single facer board, change order fast, high cutting precision, fast work speed, low waste, it also suit for color-printing box package.
2. Adopts adjustable-speed motor reduce the fault caused by transmission wearing.
3. Used high speed flat type knife, high hardness with long use life. Precision adjustable gapless gear ensure accurate mesh, good cutting with high straightness, protect knife
