Audited Supplier
37cr4 1.7034 SCr435H Gr5135
DIN, JIS, AISI, ASTM, GB, BS
Cold Drawn
Tool Steel Bar
Polished
Non-alloy
High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
Silver
RoHS, ISO9001, ASTM, JIS, GB, En, Astmb
Cold Drawn
Mill Finish(Not Polished)
Sheet, Plate, Bar, Rod, Tube, Pipe, Strip, Foil an
T/T 30% Prepayment, 70% Balance Before Delivery
2-5 Working Days After Getting The Prepayment
Taixie
Standard Export Packaging
0.5-200mm*500-2500mm*500-100000mm
China
7606910000
Product Description
1.[ Steel 37cr4 1.7034 SCr435H Gr5135 pipe& tube]
Introduction:
New opportunities for buyers!
Post free buying requirement of steel 37Cr4 (1.7034)
Mechanical properties of steel 37Cr4 (1.7034)
7.These are packaging pictures :
Introduction:
| Standard: |
|
Equivalent grades of steel 37Cr4 (1.7034)
Warning! Only for reference
| EU EN | USA - | Germany DIN,WNr | Japan JIS | France AFNOR | England BS | Italy UNI | Spain UNE | China GB | Sweden SS | Poland PN | Czechia CSN | Austria ONORM | Russia GOST | Inter ISO | ||||||||||||||||||
| 37Cr4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.[Steel 37cr4 1.7034 SCr435H Gr5135 pipe& tube]
Surface:
mill finish (not polished)
brushed
mirror
embossed
oxidized
cold-rolled
hot-rolled
3.[Steel 37cr4 1.7034 SCr435H Gr5135 pipe&tube]
Chemistry:
Chemical composition % of steel 37Cr4 (1.7034): EN 10083-3-2006
| C | Si | Mn | P | S | Cr |
| 0.34 - 0.41 | max 0.4 | 0.6 - 0.9 | max 0.025 | max 0.035 | 0.9 - 1.2 |
New opportunities for buyers!
Post free buying requirement of steel 37Cr4 (1.7034)
Mechanical properties of steel 37Cr4 (1.7034)
| Nominal diameter (mm): | to 16 | 16 - 40 | 40 - 100 |
| Rm - Tensile strength (MPa) (+QT) | 950-1150 | 850-1000 | 750-900 |
| Rm - Tensile strength (MPa) (+AC) | 590 |
| Nominal diameter(mm): or for flat products thickness: to 8; 8-20; 20-60; | to 16 | 16 - 40 | 40 - 100 |
| Re - Upper yield strength or Rp0.2 - 0.2% proof strength (MPa) (+QT) | 750 | 630 | 510 |
| KV - Impact energy (J) (+QT) | +20° 35 |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 100 |
| A - Min. elongation Lo = 5,65 √ So (%) (+QT), round products | 11 | 13 | 14 |
| Nominal diameter (mm): or for flat products thickness: to 8; 8-20; 20-60; | to 16 | 16 - 40 | 40 - 100 |
| Z - Reduction in cross section on fracture (%) (+QT) | 35 | 40 | 40 |
| Z - Reduction in cross section on fracture (%) (+AC) | 60 |
| Brinell hardness (HBW): (+S) | 255 |
| Brinell hardness (HBW): (+A) | 235 |
6.These are our warehouses :
7.These are packaging pictures :
