Audited Supplier
STH-G
Thermal Relay
Car Relay, Household Appliances Relay, Communication Relay, Lathe Relay, Overload Protect Relay
3
Ac
3
Weak Power Relay
Open Relay
Electromagnetic Type
Miniature
Electric Parameter Relay
IEC 60947-1
24,220,240,380,415V
0.63-500A
50Hz/60Hz
SONTUOEC, WZSTEC
Carton
0.16-93
Wenzhou Zhejiang
85364900
Product Description
STH-G series of thermal overload relay can be used in the circuit of 50/60 HZ, rated insulation voltage 660 V, rated current 0.1-93A for protecting the phase break when the electric motor is overload , the relay has different mechanism and temperature compensation can be pluged in ST1 series AC contactor,It is the most advanced thermal relay in the nineties in the world the products comply with IEC 60947-4.
Q 2. how's the delivery time ?
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory.
Motion Characteristic: Three-phase Balance Motion Time
| No. | Times of the setting current | Motion time | Start condition | Ambient temperature | ||
| 1 | 1.05 | >2h | Cold state | 20±5oC | ||
| 2 | 1.2 | <2h | Heat state(Following the No.1 test) | |||
| 3 | 1.5 | <4min | ||||
| 4 | 7.2 | 10A | 2s< Tp≤10s | ≤63A | Cold state | |
| 10 | 4s< Tp≤10s | >63A | ||||
Phase-losing Motion Characteristic
| No. | Times of the setting current | Motion time | Start condition | Ambient temperature | ||
| Any two phases | Another phase | |||||
| 1 | 1 | 0.9 | >2h | Cold state | 20±5oC | |
| 2 | 1.15 | 0 | <2h | Heat state(Following the No.1 test) | ||
Q 1. what's the payment term?
A. We accept TT,30% deposit and 70% balance agaisnt copy of B/L.Q 2. how's the delivery time ?
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory.
