Audited Supplier
Strong Anti-corrosion flue gas desulphurization Pump For Desulfurization Cycle/Mining Industry
FGD series flue gas desulfurization pump is a centrifugal pump of horizontal, single stage, single suction, cantilever design, the pump is a centrifugal pump of horizontal, axial end suction and radial discharge design. Its technical requirement conform to ISO5199 standard.
Parameters of Flue Desulfurization Pump
| Flow Rate: | Q=320~14000(m³/h) |
| Total Head: | H=6~65(m) |
| Operating Temperatrue: | T= -20~175(ºC) |
For shaft seal of pump,there are different patent products seal for your selection as Follows:
The order related tests, confirm the performance of pump conform.
The company carries out the tests below as standard:
Hydrostatic pressure test:
Hydrostatic pressure test based on clean water at ambient temperature,test pressure is 1.5 times on design pressure.
Performance test:
Measurement according to ISO9906,accuracy class∥,acceptance class2B.
NPSH test:
According to ISO5199 standard.
Vibration test:
According to ISO5199,vibration lightness level is controlled at class A.
Temperature test:
Test the temperature rise of bearing,and keep records.
Raw material inspect:
Spare and casting parts inspection,to ensure the reliability of the whole machinery.
