Audited Supplier
C-353
Instant Adhesive
Solid-State
Construction, Woodworking
Silicone
Room Curing
Rubber
Weatherability
Complexing Agent
Inorganic Material
All Color as Customer Requirement
Acid
340g
280g
30*20*24cm
Tank, Great Glass
100 Carton
From Wacker
High End Quality
ISO, SGS, MSDS
12 Month
CSJ
Carton
300ml
China
3506100090
Product Description
Structural Silicone Sealant For Glass Fish Tank (C-353)
Characteristics:
1. one component
2. fast acid curing, high strength
3. non-discoloring.
4. excellent cohesion for super aquarium and glass and most building materials.
5. imported wacker
5. excellent resistance to low and high temperature, little performance changes between -10 ºc~120 ºc
Application:
1. joint sealing for high-grade glass assembling.
2. joint sealing for day lighting roof construction and great glass
3. joint sealing of side window and rear window glass
4. joint sealing for super aquarium and tank
5. assembly for various kinds of windows and doors.
6. general joint and seal
Limitations:
1. cannot be used as structural sealant.
2. not compatible with materials with grease or exudation.
3. the construction surface should be clean and dry.
4. not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. cannot be used on the substrate surface below 6ºc or above 40 ºc
Way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only
Color available:
transparent, others of special order
Curing time:
track-free time is between 5-15 minutes at room temperature
completely curing time is between 24 hours to 72 hours at room temperature.
Storage and transportation:
1. 12 months stored in a dry and ventilated place below 27ºc in original packaging.
2. non-dangerous, can be transported by train, automobile, ship.
3. Uncured product may irritate eyes. In case of eyes contact, rinse them immediately with water and seek medical aid.
4. Keep out of reach of children.
Technique data sheet:
Certificate
The Imported Raw Material From DOW CORNING
Warehouse&Shipment
FAQ:
1.Can you send sample to us ?
Yes, the sample is free.
2.Can you give us private design ?
Yes, we offer OEM service, can making your own brand.
3.What's your guarantee?
10-15 years.
4.Can you provide us with your client information ?
Yes, for checking our company reputation and sample collection.
5.How many days to produce one 20'container?
5-10days.
6.Can we visit factory?
Yes, warmly welcome to visit us at any time.
7.What are the documents we provide ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.
Characteristics:
1. one component
2. fast acid curing, high strength
3. non-discoloring.
4. excellent cohesion for super aquarium and glass and most building materials.
5. imported wacker
5. excellent resistance to low and high temperature, little performance changes between -10 ºc~120 ºc
Application:
1. joint sealing for high-grade glass assembling.
2. joint sealing for day lighting roof construction and great glass
3. joint sealing of side window and rear window glass
4. joint sealing for super aquarium and tank
5. assembly for various kinds of windows and doors.
6. general joint and seal
Limitations:
1. cannot be used as structural sealant.
2. not compatible with materials with grease or exudation.
3. the construction surface should be clean and dry.
4. not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. cannot be used on the substrate surface below 6ºc or above 40 ºc
Way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only
Color available:
transparent, others of special order
Curing time:
track-free time is between 5-15 minutes at room temperature
completely curing time is between 24 hours to 72 hours at room temperature.
Storage and transportation:
1. 12 months stored in a dry and ventilated place below 27ºc in original packaging.
2. non-dangerous, can be transported by train, automobile, ship.
3. Uncured product may irritate eyes. In case of eyes contact, rinse them immediately with water and seek medical aid.
4. Keep out of reach of children.
Technique data sheet:
| no | item | the standard | test result | ||
| 1 | appearance | have no grain, no agglomerations, no skinning, and no bubble. | pass the standard | ||
| 2 | density (g/cm3) | ±0.1 | 0.960 | ||
| 3 | droop degree (mm) | uprightness | ≤3 | 0 | |
| level | no damage | no damage | |||
| 4 | skinning time (h) | ≤3 | 0.2 | ||
| 5 | elastic recovery ratio (%) | ≥80 | 99 | ||
| 6 | extrusion ability( ml/min) | ≥80 | 108 | ||
| 7 | tensile modulus (mpa) | 23ºc | ≤ 0.4 | 0.39 | |
| 8 | cold-hot adhesive | no damage | no damage | ||
| 9 | under water adhesive | no damage | no damage | ||
| 10 | uv radiation | no damage | no damage | ||
| 11 | definite elongation | no damage | no damage | ||
Certificate
The Imported Raw Material From DOW CORNING
Warehouse&Shipment
FAQ:
1.Can you send sample to us ?
Yes, the sample is free.
2.Can you give us private design ?
Yes, we offer OEM service, can making your own brand.
3.What's your guarantee?
10-15 years.
4.Can you provide us with your client information ?
Yes, for checking our company reputation and sample collection.
5.How many days to produce one 20'container?
5-10days.
6.Can we visit factory?
Yes, warmly welcome to visit us at any time.
7.What are the documents we provide ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.
