Sulfonated Melamine Polymer/ Sulphonated Melamine Formaldehyde Powder SMF

Sulphonated Melamine Formaldehyde Resin Based Superplasticizer

SMF-10

SMF-10 is a Sulphonated Melamine Formaldehyde Resin Based Superplasticizer, suitable for cement-based or gypsum-based mortars that require high fluidity and high strength.

Range of Application

SMF-10 has good compatibility with different cements, gypsum cementing materials and other additives such as defoamers, thickeners, retarders, expansion agents, hardening accelerators, etc., and can give mortars quick plasticization, high fluidization effect and low air entrainment.

Recommended Application:

Flowable mortar for pouring

Flowable mortar for paving

Flowable mortar for painting

Fluid mortar for pumping

Steam curing concrete

Other dry mix mortar or concrete

Method of Use

Package into finished products after mixing with other dry powder components evenly, and use it after mixing with the recommended amount of water on site.

The recommended addition amount is 0.3-1.00% of the cementitious material, which needs to be determined in advance based on raw materials and construction specifications.

Physicochemical Property

Packing Specification

Packed in plastic woven bag, 25 kg/bag.

Storage Conditions

The product should be stored in a dry and clean environment in the original packaging and away from heat sources. This product is not easy to fail, but it is a hydrophilic-based product. If the storage environment is poor, it will slowly absorb water. It is recommended to follow the first-in first-out principle when using it.

If the product is not used up, the packaging must be tightly sealed to prevent moisture intrusion.

Product Safety

According to laws and regulations on dangerous goods and preparations, this product is harmless. The formation and accumulation of dust should be avoided. Scattered products should be cleaned up in a dry state. There is a risk of slipping when contacted with water. For detailed information, please contact us.
 

SIDLEYCHEM has focused on the application development and product promotion of construction chemicals such as mortars and coating additives for many years. To provide customers with professional, customized one-stop product supply services and systemized solutions. At present, it has formed fields covering mortar, paint and daily chemicals.

Capacity

SIDLEYCHEM has the production base in Shandong, China with an annual production capacity of 15,000MT of MC (HPMC/MHEC); 5000 MT of HEC; 10000MT of RDP; 10000MT of PAC for oildrilling; 15000MT of Calcium Formate/Sodium Formate/Potassium Formate etc.

Services

As one of the best suppliers of mortar additives in China, Sidleychem has its own technology center to assist customers in product analysis, product development, formulation optimization and more. At the same time providing the most competitive products, providing customers with the best customized service is our goal.

Advantage

• Most competitive price
• Technical Support.
• customized service.
• 
  
  Packing & Shipping:
  
  In 20/25kg paper bags inner with PE bags
  20'FCL:10 tons with pallets or 12.5 tons without pallets
  
  Storage &Transportation:
  -No Damage during the transportation;
  - Protect from Humidity, Rain, Sunlight, Damp and wet;
  -Put in dry and ventilated Place During storage;
  - Remind must be promptly sealed and packed to prohibit from wet.