Audited Supplier
SWE35UF
Provided
Provided
Crawler Excavator
Special Excavator, Marine Excavator, Mining Excavator, GM Excavator
Backhoe
Hydraulic Transmission
Internal Combustion Drive
0.11m3
Small-Scale
CE
New
23.4kw/Rpm
4.0/2.3km/H
40L
19.8kn
4890*1700*2555mm
4925mm
3120mm
5390mm
3400mm
1900mm
SUNWARD
Provided
3850kg
China
8429521200
Product Description
The Sunward SWE 35UF mini excavator is the largest mini excavator in the Sunward range. The zero-tail SWE35UF can handle bigger projects than its smaller companions, while also maintaining good performance, maneuverability, and speed on the job. With a ROPS / FOPS cab outfitted with A/C and heat, this machine can keep going no matter what. In the Sunward tradition to always offer the best value for money, the SWE 35UF is no exception since it offers many features and up to 3 years of warranty as standard, at the right price. Of course, because we know that safety and comfort should go hand-in-hand, the SWE 35UF keeps you safe and provides every comfort in all working conditions.
On top of its EU certification, the Sunward SWE 35UF, like all Sunward machines on the European market, is designed to meet European customer needs.
We chose the powerful Kubota D1703 engine for several good reasons. This engine is a vertical, water-cooled, 4-cycle diesel engine with a capacity of 18.2 kW at 2200 rpm. Featuring a built-in solenoid, low fan position, and single side serviceability, the Kubota D1703 offers powerful performance, exceptional reliability and long service life to meet a wide range of applications. The perfect fit for our reliable and versatile SWE 35UF.
All key components in Sunward excavators are carefully selected, from Kubota engine to hydraulics. Because hydraulics are often regarded as the heart of the machine, Sunward sources exclusively from the highest references in the market. For our Sunward SWE 35UF, we selected HENGLI to be our main supplier for the hydraulic pump, and KYB or Nachi for the swing motor traveling and swing motor. All these pumps and components for construction machinery are efficient, reliable, and space-saving. So, it's no coincidence that Sunward selected them to contribute to the SWE 35UF's reliability.
The SWE 35UF has exceptional digging forces - 31.8 kN (bucket) and 22.53 kN (arm) - easily rivaling all 3.5t excavator competitors on the market. And when it comes to its long-reach capacity, the SWE 35UF's boom cylinder design provides a ground reach of over 5.2 meters (5 260 mm) and a digging reach that's over 5.3 meters (5 390 mm) long - making this mini excavator the benchmark of its range.
This slightly Sunward SWE 35UF mini excavator has it all from the day it leaves the factory:
- Auto idle engine to save fuel and limit the engine's consumption. - While other manufacturers usually use a flow throttle (because it's cheaper), we at Sunward opt for a Load Sensing (hydraulic) system, which provides better energy-saving possibilities.
- Safety valves for the boom cylinder for safer operations.
- Auto-shifting traveling motor for smooth operations to the operator.
- TOPS & FOPS cab.
- Battery cut-off switch for safer operations and prolonged battery lifetime and power - which is especially appreciated in the cold weather of Scandinavian countries.
- Double Acting Hydraulic Circuit
- Factory-fitted Hydraulic Quick Hitch Lines
- Factory-fitted Hammer & Rotation Line
- Factory-fitted Case Drain Line
- Factory-fitted One hydraulic pilot control with a double contact switch
- Factory-fitted Tiltrotator Configured Joystick Controls (tiltrotator of your choice)
- 4 LED work lights as standard: 2 on the front of the cab, 1 on the left side of the boom, and 1 on the back
| Parameter List | |||
|---|---|---|---|
| Type of cab | Cabin/Canopy | ||
| Bucket capacity,std. | 0.11m3 | ||
| Bucket width | 520mm | ||
| Machine weight | 3850/3750 kg | ||
Dimensions | Overall length | 4890mm | |
| Overall height | 2545mm | ||
| Overall width | 1700mm | ||
| Ground clearance | 270mm | ||
Engine | Brand | KUBOTA | |
| Model | D1709-E4B-SWD-1 | ||
| Displacement | 1.647L | ||
| Output | 18.5kW/2200rpm | ||
Working ranges
| Max. cutting height | 4925mm | |
| Max. loading height | 3400mm | ||
| Max. digging depth | 3120mm | ||
| Max. vertical wall digging depth | 5260mm | ||
| Max. digging reach | 5390mm | ||
| oom swing angle(left/right) | 72°/44° | ||
| Front swing radius | 2263mm | ||
| Tail swing radius | 850mm | ||
| Max. digging force(Arm) | 22.53kN | ||
| Max. digging force(Bucket) | 31.8kN | ||
| Track | Type | Rubber track | |
| Track width | 300mm | ||
Undercarrige | Track length | 2160mm | |
| Length to center of rollers | 1670mm | ||
| Lenhth to center of track | 1400mm | ||
| Travelling speed(High/Low) | 4.2/2.3 km/h | ||
| Gradeability | 30° | ||
| Swing speed | 9rpm | ||
| Ground pressure | 32.3kPa | ||
| Dozer size | Width | 1700mm | |
| Height | 366mm | ||
| Lifting capacity (Height/Depth) | 337/376 mm | ||
| Hydraulic pumps | Type | 1 variable plunger pump | |
| Displacement | 1*40L/min | ||
| Hydraulic pressure | 24.5MPa | ||
| Fuel tank capacity | 40L | ||
| Hydraulic oil tank capacity | 41L | ||
