Audited Supplier
KR-715
25035-69-2
Oeko-Tex
Yes
White
Pringting and Dyeing Auxiliary Products
Milky White Viscous Emulsion
Textile Printing Auxiliary, Post-Processing Auxiliary
Suggestion Dosage 2.5-3%
86±2%
KERUN
Drums
50kgs/130kgs/150kgs/160kgs
China
3809910000
Product Description
No Washing Nano-Disperse Printing Thickener KR-715
Specification
This product is used in disperse printing. Using the no washing nano-disperse thickener instead of traditional disperse thickener or paste, not only can get high paste rate, but also can eliminate the reduction cleaning process, to achieve the reduction of pollution and costs. On polyester fabric, the color brightness, color value, and shape clearance can be obviously improved, no colour staining.
Technical Index
- Appearance: beige emulsion
- Ionicity: anionic
- pH value (1% solution): 6.0~7.0
- High paste rate, can eliminate the reduction cleaning process, reduce pollution and costs.
- It can provide better thickening effects, with good stability, clear shape high color value and good penetration performance. Mainly used on polyester fabrics.
Item Dosage
KR-712A 2.5%
Disperse dyes X%
Water and Others Y%
Total 100%
Procedure:
Prepare paste>flat screen or rotary screen printing>steaming or baking for color fixing (180-190ºC*3-6min)>washing
The above dosage is just for reference, preliminary trials should be carried out.
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical synthesis from various monomers
SECTION 3: HAZARDS IDENTIFICATION
Eye contact: May cause eye irritation, redness, tearing
Skin contact:No bad effect if contact with skin
SECTION 4: FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If feeling that it is difficult to breath or have contacted for a long time, Consult a physician.
In case of skin contact
Immediately take off the clothes, washing with plenty of water using the soap or special detergent.
In case of eye contact
You should rinse the eyes for 10 minutes. If the eyes are still very afflictive, please seek medical attention.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Drink plenty of water. Consult a physician.
SECTION 5: FIREFIGHTING MEASURES
5.1 Extinguishing media
Suitable extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
5.2 Limits No limit
5.3 Fire/Explosion hazard No
5.4 Main burning gas NH3
5.5 Personal protection Nose and mouth breathing respirator
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1 Personal protection
Wear appropriate rubber protective gloves and chemical safety goggles, people without protective equipments should leave.
6.2 Environmental precautions
Do not let product enter sewage system, pot holes, soil. Discharge into the environment must be avoided.
6.3 Methods and materials for containment and cleaning up
Sweep up and shovel into containers marked as chemical waste. Keep in suitable, closed containers for disposal.
SECTION 7: HANDLING AND STORAGE
7.1 Occupational health
Avoid swallow, inhale, contact with skin and eyes, follow good industrial health habits and rules
7.2 Fire prevention No special measures
7.3 Storage requirements Store in shady, dry, ventilated place.
7.4 Quarantine measures No special measures
7.5 Storage conditions
Minimum storage temperature : ≥-2°C
Maximun storage temperature : ≤55°C
Keep container tightly closed, in a well-ventilated workplace.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Occupational exposure limits See related laws and regulations
8.2 Basic personal protection
Wear appropriate rubber protective gloves and chemical safety goggles, people without protective equipments should leave.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
a) Form: emulsion
b) Color: milky white to light yellow emulsion
c) Odour: Slightly alcohol odour
9.2 Relevant safety data
a) Auto-ignition temperature >350°C
b) Explosion limits no hazards of explosion
c) Flash point >160°C
d) Density 0.95-1.05g/cm3
e) Water solubility Any dilute ratio with water
f) pH 6.0 -7.0 (at 25 °C)
g) Ionicity Anionic
Certificatate :
ZDHC MRSL LEVEL 3
Exhibition Photos :
