Audited Supplier
H32
Dual Frequency Receiver
Multi-Channel Multi-Channel Receiver
Geodesic Receiver
GPS Glonass Receiver
GPS Glonass
UHF/PCC/3G
2.5mm+0.5ppm RMS
5mm+0.5ppm RMS
72 Channels
16.5cm*10.5cm
One Button Make Rover Operation
1.75kg
IP67
1mm
4
1
Hi-target
Standard Export Package with Carton Case
CE FC
China
Product Description
Surveying Equipment GPS Base and Rover Hi-Target Rtk Gnss with licensed Software Hi-survey Dual Frequency GPS Recevier
| Model | GPS H32 |
| Measurements | |
| 120 channels | |
| Proven NovAtel GNSS technology | |
| Multipath mitigating technology | |
| Auxiliary strobe signals, including a configurable output for time synchronization and mark inputs | |
| Satellite signals tracked simultaneously | |
| GPS | L1, L2, L2C |
| GLONASS | L1, L2 |
| SBAS | Simultaneous L1 C/A, L5 |
| Galileo | E1 |
| GIOVE-A/GIOVE-B (test) | |
| BDS/Compass | |
| SBAS | |
| QZSS | |
| POSITIONING PERFORMANCE | |
| Static and Fast Static GNSS surveying | |
| Horizontal | 2.5mm+0.5ppm RMS |
| Vertical | 5mm+0.5ppm RMS |
| Post Processing Kinematic | |
| (PPK / Stop & Go) GNSS surveying | |
| Horizontal | 1cm+1ppm RMS |
| Vertical | 2.5cm+1ppm RMS |
| Initialization time | typically 10 minutes for base while 5 minutes for rover |
| Initialization reliability | typically > 99.9% |
| Real-time Kinematic(RTK) surveying | |
| Horizontal | 10mm+1ppm RMS |
| Vertical | 20mm+1ppm RMS |
| Initialization time | typically < 10 seconds |
| Initialization reliability | typically > 99.9% |
| Code Differential GNSS positioning | |
| Horizontal | 25cm+1ppm RMS |
| Vertical | 50cm+1ppm RMS |
| SBAS | 0.60m Horizontal |
| HARDWARE | |
| Physical | |
| Dimensions (W x H) | 16.5 cm x 10.5 cm (6.50 in x 4.13 in) |
| Weight | 1.75kg (3.86lb) with internal battery, internal radio, standard UHF antenna |
| Operating temperature | below 45ºC to above 65ºC (-49ºF to +149ºF) |
| Storage temperature | below 55ºC to above 85ºC (-67ºF to +185ºF) |
| Humidity | 100%, considering |
| Water/dustproof | IP67 dustproof, protected from temporary immersion to depth of 1m (3.28ft). |
| Shock and Vibration | Designed to survive a 2m(6.56ft) natural fall onto concrete |
| Display | 128×64 resolution, 1.54 inch OLED screen |
| Electrical | |
| Power 6V to 28V DC external power input | |
| Power consumption 2.5W | |
| Automatic Switching between internal power and external power | |
| Rechargeable, removable 7.4V, 4400mAh Lithium-Ion battery in internal battery compartment | |
| Internal battery life | |
| Static 13 - 15 hours | |
| RTK Rover (UHF/GPRS/3G) 10 - 12 hours | |
| RTK Base 8 - 10 hours | |
| I/O interface | |
| 1 x Bluetooth | |
| 1 x standard USB2.0 port | |
| 2 x RS232 serial port | |
| 2 x DC power input (8-pin & 5-pin) | |
| COMMUNICATION AND DATA STORAGE | |
| GPRS/GSM | |
| Fully integrated, fully sealed internal GPRS/GSM | |
| Network RTK (via CORS) range20-50km | |
| HI-TARGET internal UHF radio (standard) | |
| Frequency | 460 MHz with 116 channels |
| Transmitting Power | 0.1W, 1W, 2W adjustable |
| Transmitting Speed | Up to 19.2Kbps |
| Working Range | 3~5Km typical, 8~10km optimal |
| HI-TARGET External UHF radio (standard) | |
| Frequency | 460 MHz with 116 channels |
| Transmitting Power | 0.1W, 1W, 2W adjustable |
| Transmitting Speed | Up to 19.2Kbps |
| Working Range | 3~5km typical, 8~10km optimal |
| Support most of radio communication protocol | |
| HI-TARGET External UHF radio (standard) | |
| Frequency | 460 MHz with 116 channels |
| Transmitting Power | 5W, 10W, 20W, 30W adjustable |
| Transmitting Speed | Up to 19.2Kbps |
| Working Range | 8~10Km typical, 15~20km optimal |
| Support other external communication device | |
| For example, external GSM modem. | |
| Data storage | |
| 64MB internal memory | |
| Data formats | |
| (1Hz positioning output, up to 50 Hz - depends on installed option) | |
| CMR | CMR+, CMR input and output |
| RTCM | RTCM 2.1, 2.2, 2.3, 3.0, 3.1 input and output |
| RTCA | RTCA |
| Navigation outputs | NMEA-0183, NovAtel ASCII and Binary logs |
