Synthetic Macro Fiber Polypropylene PP Fiber for Concrete Reinforcement Use in Filling Material

Price $2.50 Compare
Min Order 1000 kg
Availability In Stock
Shipping From Anhui, China
Popularity 397 people viewed
Quantity
+-
 

Briture Co., Ltd.

VIP   Audited Supplier 14 years
Profile Certified by SGS/BV
embossed
Concrete Reinforcement
White
64 mm
High-strength Polypropylene Fiber
High Tenacity
Microfiber
1000kg
Two Years
5kg/Carton
1.30-1.40mm
>=550MPa
>=9000MPa
Briture
5kg/ Box,
1200-1300kgs/pallet, 12800kgs/1X20`FCL,
China
5503400000
Product Description
Synthetic Macro fiber
Product Description

Briture Synthetic Macrofiber is made of Polypropylene.
These fibers are wrapped in bundles of water-soluble film and packed in cartons. When used, just put the whole boxes of the fibers into concrete.
The cartons and film are dissolved in water and the fibers are evenly dispersed in the concrete mixture.
Available Length: 48mm, 54mm, 64mm..

Features
1. All grades of concrete to provide good anti - fatigue, anti - shrinkage, anti - seismic and good toughness.
2. Simple operation, not easy to group, safety, reasonable price, cost savings..
3. It can be used in highly corrosive, humid environment.
4. The surface has been embossed, which greatly improved the cohesive force between fibers and concrete, and also boosts shrinkage resistance and crack resistance.
5. The strength of synthetic macro fiber is not as strong as that of steel fiber, but the experiment shows that under the same conditions, each cubic meter concrete needs 3kg-6kg of synthetic macro fiber, while steel fiber needs 25kg-40kg. The results show that the concrete with macro synthetic fiber has better toughness and anti-microcrack effect.
Dosage
The dosage rate is dependent on the actual application however the minimum dosage range is 3kg/ m3-6kg / m3.
Application
Shotcrete, concrete engineering, such as foundations, roads, Bridges, DAMS, especially in the deformation and toughness of the higher requirements of the project, such as mining and water conservancy and hydropower projects.
Specification
 
Minimum Tensile Strength≥550MPa
Modulus≥9000Mpa
Fiber Dimension
L: 48mm/54mm/64mm;T: 0.55-0.60mm;
W: 1.30-1.40mm
Melt Point170ºC
Density0.91g/cm3
Melt flow3.5
acid&alkali resistanceExcellent
Moisture Content≤0%
AppearanceEmbossed
 
Packaging & Shipping
5kg/ box, 1200-1300kgs/pallet, 12800kgs/1X20`FCL, 25600kgs/1X40`FCL.
Certifications

 

  • Contact Supplier
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
$5.20 1000 kg(MOQ)

Similar to Degalan P24 Solid Acrylic Resin for Heat Seal Lacquer

Briture Co., Ltd.
$1.50 10000 Square Meters(MOQ)

Fiberglass Geogrid Stitched with Nonwoven Geotextile Coated Bitumen

Briture Co., Ltd.
$2.00 1000 kg(MOQ)

Reinforced Polypropylene PP Micro Fiber 12mm for Concrete or Cement

Briture Co., Ltd.
$3.80 1000 kg(MOQ)

Solid Acrylic Resin Ba-725 Similar to Dsm Neocryl B-725

Briture Co., Ltd.
$2.50 1000 kg(MOQ)

Wave Macro Synthetic Fiber for Reinforced Concrete Track Slab

Anhui Elite Industrial Co., Ltd.
$1100.00 1 Ton(MOQ)

Cold Drawn Hooked End Steel Fiber Tensile Strength >

SAPEN INTERNATIONAL CO., LTD.
$1100.00 1 Ton(MOQ)

High Strength Concrete Used Hook End Steel Fibres

SAPEN INTERNATIONAL CO., LTD.
$2500.00 9000 kg(MOQ)

High Strength Crack Resistant Fiber Polypropylene Manufacturers

Dezhou Hongli Geomaterial Engineering Co., Ltd
$1.50 1 Kilogram/Kilograms(MOQ)

Uhpc Brass Coated Micro Steel Fibre

GANZHOU DAYE METALLIC FIBRES CO., LTD.
$0.90 1 Kilogram/Kilograms(MOQ)

Loose End Hook Concrete Additives Steel Fibre Concrete Steel Fiber

GANZHOU DAYE METALLIC FIBRES CO., LTD.