Audited Supplier
SHT30
Surface Mounting
Resistive
Contact
Analog Type
Waterproof
Ceramics
Humidity
IP67
ISO
Customized
-40deg~+125deg
0 - 100% Rh
85cm, 1m, 1.5m, 2m, etc
Ceramic Case, Stainless Steel Probe, ABS Probe
PVC Cable, PU Cable, Silicone Cable, etc
±2 @2-100% Rh
±0.2 @0-90ºC
3V to 5.5V
Gray, Black, White
One Wire
Vcc, Gnd, Scl, Sda
Stereo Plug, Rj12 Connector
I2c
Waterproof
Accept
Senstech
PE Bag, Paper Carton
SHT30
Guangdong, China
9025191010
Product Description
SHT30 SHT31 Temperature Humidity Sensor Probe
More Specifications
| Sensor | SHT40, SHT45, SHT31, SHT30, SHT35, SHT20, SHT21, DHT20, DHT11, DHT22 etc |
| Cable | PVC cable, Silicone cable, TPE Flat Jacket cable, PVC Cold-resistant Jacket cable, or another |
| Probe | Stainless steel probe, Ceramic Case, Brass probe, PE, or customized |
| Connector | Aviation plug, PH, XH, SM, EL, Pin terminal, Terminal blocks, 0508 terminal, fork terminal, stereo plug, RJ11/12/45 connector, or another |
| Length | 1m, 1.5m, 2m, 5m, 10m, 20m, 100m or customized |
Click here to get a datasheet........
This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT20 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT20 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
Application:
1. HVAC
2.Consumer goods
3.Weather stations,
4.Test & measurement
1. HVAC
2.Consumer goods
3.Weather stations,
4.Test & measurement
5.Automation Medical
6.Humidifiers
6.Humidifiers
7. Greenhouse
8. Cold-chain transportation
and so on.....
and so on.....
