Audited Supplier
telecom tower
Single Tube Tower
Vertical Type
Standard
Steel Pipe Tower
Diamond
ISO, CNAS
New
Hot Dipping Galvanized
as Required
Q235/Q355/Q420/Q460
Telecommunication Tower
10m-100m
Factory Floor Price
HTY
Steel Belt/Plastic Paper
steel
China
Product Description
Company Profile
HTY Electric specializes in transmission & telecom tower/pole design, OEM, sales, and on site service.
Professional design according to ASCE/SEI for transmission line towers/ poles, ANSI/TIA-222-G for telecom towers/poles. PLS TOWER/POLE, MS TOWER, SAP2000, SMART TOWER are common used for designing.
Product Description
| Height | From 10M-100M or according to client's requirement |
| Suit for | All communication or signal towers |
| Shape | Polygonal or Conical, or Lattice |
| Material | Normally Q235B/A36,Yeild Strength≥235MPa |
| Q345B/A572,Yeild Strength≥345MPa | |
| As well as Hot Rolled coil from ASTM572, GR65,GR50,SS400 | |
| Loading Capacity | According to project`s requirement |
| Tolerance of the dimension | According to client's requirement |
| Surface treatment | Hot-dip-galvanized following ASTM123, or any other standard by client's requirement |
| Joint of Poles | Slip joint, flanged connected or bolt connected |
| Standard | ISO9001:2008 |
| Length of per section | Within 13M once forming |
| Welding Standard | AWS(American Welding Society)D 1.1 |
| Production Process | Raw material test-cutting-bending-welding-dimension verify-flange welding-hole drilling-sample assemble-surface clean-galvanization or power coating /painting-recalibration-packages |
| Packages | Packing with plastic paper or according to client's requirement |
| Life Period | More than 30 years, it is according to installing environment |
Product Parameters
Type of Standard Antenna Supporting
3 or 4 legged Broadcast Tower constructed either from Angles or Pipes using Mild steel and High Tensile materials for Main legs and Tower members
Design Wind Speed: 120- 250km/hr
Custom design to Client requirement
Design Criteria Standard
The design criteria are based on an extensive research on Broadcast antenna supporting structures fulfilling the majority of technical specifications and requirements of Broadcast antenna applications
International Design Standards and Codes such as (BS 8100,EIA/TIA -222G) are used.
| Brand | HTY TOWER |
| Place of Origin | Shandong, China |
| Height | 10-100 / customized |
| Use | Telecommunication |
| Coating | Hot dipping galvanized / painting as requires |
| Design Code | ANSI/TIA-222-F/G |
| Design APP | MS TOWER, PLS TOWER, 3D3S |
| Warranty | More than 20 years |
Accessories
Ladder
Generally the ladders are built at centre of tower or corner of tower.Safety Climb
With new OH&S standards, where practical, riggers now have to be attached at all times. Creative stock a full range of fall arrest systems. The safety device incorporates a steel cable, which is installed on the climbing structure. Riggers equipped with a harness and with sliding sleeve ascend the structure while constantly attached to the cable.
Feeder Brackets
Towers generally have feeder brackets which secure the cables running up to the equipment on the structure. Depending on the number of cables that need to be run another set of feeder brackets can be added to another leg or even on the outside of the structure.
Cable Tray
Cable trays have a similar purpose to feeder brackets. A cable tray can be run vertically the whole way up the structure; however it is more commonly used to support and secure cables from the lower part of the structure horizontally to the equipment shelter.
Lightning Protection
A lightning finial is used at the top of the structure which under normally conditions would be struck by a lightning hit instead of equipment fitted to structure.
Earthing
Our standard earthing kit comprises of a galvanised steel 3m strap attached to the structure which is connected to a 1m stake in the ground.
Platforms
Platforms can be supplied are:
- Work Platforms
- Rest Platforms
- Lookout Platforms
Antenna mounts
Antenna mounts can be supplied for:
- Microwave antennas
- Broadcast Antennas
- GSM mobile antennas
- Small miscellaneous antennas
We can also design and fabricate custom mounts to suit your requirements.
Aircraft Warning Lights
Where required, Creative structures can be fitted with aircraft warning lights to comply with all relevant airport control authority requirements. These include:
- Single & Twin Lights - led Low Intensity
- Beacon Lights - Led Medium Intensity
- Strobe Lights - Led High Intensity
- Photo Cells
- Power Cables
Anti Climb
An anti climb device is a barrier around the base of the structure that fends off the general public from climbing up the structure.
Manufacturing process
FAQ
