Audited Supplier
Production Introduction
Surface coating machine is comprised of three cylinders where materials and surface coating agents are fed and dispersed by vortex two phase flow. With the help of heat generated physically between the material and the rotor, the material and the agents functions evenly on the powder surface to complete the course of surface coating.
- Realize powder surface modification by changing inner vortex with three rotating rotors.
- Mature technology, low investment, suitable for stearic acid coating.
- Self-friction generates heat, no heating device is needed, less auxiliary machine, and low operating cost.
- Suitable for powder coatings of 325~3000 mesh.
- Power range: 11kW~225kW; Maximum output: 6t/h.
- The air volume is small, the dispersibility is poor, especially the fine powder, and the amount of modifier is large.
- Self-friction heat generation is easily affected by environmental factors, and the modification temperature is poorly controllable.
- There is a dead zone and the coating rate is low.
1. It can modify the surface of 800-2500 mesh powder and certain depolymerization and dispersing function.
2. Suitable for calcium carbonate, kaolin, vermiclite, grapgite, silicon micropowder and other powders.
| Model | Power of Main Machine (Kw) | Power of Main Blower (Kw) | Comperessed Air (m³/min) | Capacity (t/h) | Surface Coating Ratio |
| LYGX-660 | 119 | 22 | 1.5 | 2-3 | 70%-90% |
According to different materials and application industries, the production capacity and particle size range will be different. Please contact our service engineers to customize the equipment for you. Our experts will contact you within 6 hours to discuss your needs for machine and processes.
