Top 10 China Factory Supply Virgin HDPE Granules

Price $850.00 Compare
Min Order 10 Tons
Availability In Stock
Shipping From Beijing, China
Popularity 328 people viewed
Quantity
+-
 

Beijing Ou Yuan Sheng Fa Plastic Products Co., Ltd.

VIP   Audited Supplier 13 years
Profile Certified by SGS/BV
5502 5000s 7000f
High Density Polyethylene/HDPE
General Plastics
Thermoplastic Plastics
Film/Blow/Injection/Extrusion
White
HDPE
T/T L/C
Within 10 Days After Receiving Deposit
sinopec
25kg/Bag
SGS
China
3901200090
Product Description




1.
Introduction

HDPE has several properties that make it ideal as a packaging and manufacturing product. It's stronger than standard polyethylene, acts as an effective barrier against moisture and remains solid at room temperature. It resists insects, rot and other chemicals. It is easily recyclable and can be used again and again. Recycled HDPE creates no harmful emissions during its production or during its use by the consumer.  Also, HDPE leaks no toxic chemicals into the soil or water.

 

HDPE is one of the most commonly used plastics in the world. It is typically found in milk jugs, plastic bags and refillable plastic bottles. In addition to plastic lumber and recycled plastic furniture, recycled HDPE is used to manufacture lawn and garden products, buckets, crates, office products and automobile parts.

 

2.Grade

HDPE pipe grade can be used in the production of pressure pipes, such as pressurized water pipes, fuel gas pipelines and other industrial pipes. 

HDPE Injection grade, red, blue, green, 

HDPE Blow grade, white, grey, black 

HDPE Pipe Grade black pellet 

HDPE coating grade

And So On

 

3.Specification

HDPE cable material Property

Typical Value

Mass density  g/cm 3

0.941-0.959

Melt flow Rate(190 centidegree /2.16kg)g/10min

≤1.0

Tensile yield strength  MPa

≥19.0

Flexural modulus  Mpa

≥965

Elongation@ break %

≥400

Impact Embrittlement temperature centidegree

MAX -118

Dielectric Constant

100KHZ

2.32

1MHZ

2.31

Loss Tangent

100KHZ

MAX 0.0001

1MHZ

MAX 0.0001

Volume resistivity OHM-CM

MIN 1x10 15

 

 

4.Products Properties

High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 °C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.

 

5.Storage:

Shelf life: It should avoid damp, contaminated and direct sun light during transport.And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together,and away from the fire.

  • Contact Supplier
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
$960.00 20 Tons(MOQ)

Factory Supply Polystyrene EPS Granules Plastic Raw Material with Cheap Price

Beijing Ou Yuan Sheng Fa Plastic Products Co., Ltd.
$850.00 5 Tons(MOQ)

Polyvinyl Chloride PVC Resin Sg5 with K Value 66-68

Beijing Ou Yuan Sheng Fa Plastic Products Co., Ltd.
$900.00 25 Tons(MOQ)

Hot Selling Plastic Raw Material with High Quality PP

Beijing Ou Yuan Sheng Fa Plastic Products Co., Ltd.
$960.00 20 Tons(MOQ)

Virgin&Recycled GPPS for Extrusion Moulding General Purpose Polystyrene

Beijing Ou Yuan Sheng Fa Plastic Products Co., Ltd.
$1050.00 20 Tons(MOQ)

EVA-G-mAh by Maleic Anhydride Grafted EVA

Inner Mongolia Harbor Trade Chemicals Co., Ltd.
$1200.00 17 Tons(MOQ)

HDPE Film Grade Luban Dgdz-6095, Mfr=0.05

Shanghai Chemdo Trading Limited
$1300.00 16 Tons(MOQ)

Factory Price DOP/Dotp Chemical Manufacturers

Qingdao Kejunsheng New Material Co., Ltd.
$1.28 1 Ton(MOQ)

Optical Fiber Cable Loose Tube PBT Plastic Raw Materials

Shanghang Xinchanglong Industrial Co., Ltd
$2500.00 1 Ton(MOQ)

Manufacturer Injection Moulding PC Raw Material PC GF20 Plastic Raw Material Granule

HEBEI CHIJIANG IMPORT AND EXPORT CO.,LTD.
$1230.00 27 Tons(MOQ)

Polypropylene PP Plastic Raw Material Model L5e89

Hunan Mingray Trade Co., Ltd.