Audited Supplier
Toynol DS-195L
Liquid
Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Leather Auxiliary Agents, Electronics Chemicals
Yellow
disperse inorganic pigment
Hi-pereral
1kg for testing
DHL, Fedex, UPS
24months
within 10-20days after payment
Toynol
200kg drum
40%
Tianjin
3402130090
Product Description
Toynol® DS-195L/195H Dispersing Agent
| Product Introduction |
Characteristics
High performance dispersing agents in water-based system
Good wetting effect to pigment and fillings
Outstanding deflocculation
Provide powerful charge repulsion property
Suitable for various powder
Reduce viscosity of grinding system, improve color development of millbase
APEO free
Chemical ComponentsSolution of high molecular polymers with pigment anchoring group
Highly Recommended Applications
Iron oxide, Transparent iron oxide
Titanium Dioxide
Carbon black
Organic pigments
| Typical Properties | ||
| Item | DS-195L | DS-195H |
| Appearance | Yellow transparent liquid | Yellow transparent liquid |
| Content(%) | 40% | 40% |
| Solvent | water | water |
Grinding operation
Dispersing sand mill, Glass bead(0.8-1.2mm), Filling rate 70%
3000rmp/min 60min
Performance evaluation
- Centrifugal stability: take 20ml millbase into centrifuge tube, centrifuge 10 min under condition of 3000r/min, then take out to observe the layering of millbase. Pour out liquid and calculate amount and percentage of precipitate.
- Viscosity evaluation: Use Brookfield rotational viscometer.
- Fineness measure: Scraper fineness meter
- iscosity stability: Store millbase in 100ml wild-mouth bottle at 40ºC for 24 hours, measure viscosity change, ±50% change is regarded qualified.
Example1(★:Excellent ☆:Good )
Experimental pigment: transparent red iron oxide TR-718, powder content 40%
Inorganic pigment content: 40
Dispersant dosage(as supplied): 40
Sodium hydroxide: Appropriate amount(PH mixed to 8-9)
Defoamer(Toynol®): 0.1-0.3
Wetting agent(Toynol®): 0-0.3(as appropriate)
Water: add to 100
| Item | Toynol® DS-195L | Imported dispersant |
| Dispersant dosage(SOP) | 40% | 40% |
| Wetting of original powder | Quick | Very quick(foaming seriously) |
| Stock solution stability (centrifugation) | ★ | ☆ |
| Dilution stability(centrifugation) | ★ | ☆ |
| Millbase viscosity | ★ | ☆ |
| Dispersion fineness(μm) | ≤2.5 | ≤2.5 |
| Change of storage viscosity | Without thickening and thixotropy | Without thickening and thixotropy |
Example2(★:Excellent ☆:Good )
Experimental pigment: Titanium dioxide R-996, powder content 35%
Organic pigment content: 70
Dispersant dosage(as supplied): 10.5
Defoamer(Toynol®): 0.1-0.3
Wetting agent(Toynol®): 0-0.3(as appropriate)
Water: add to 100%
| Item | Toynol® DS-195L/H | Toynol® DS-194L | Imported dispersant |
| Dispersant dosage(SOP) | 6% | 6% | 6% |
| Wetting of original powder | Quick | Quick | Very quick |
| Stock solution stability (centrifugation) | ★ | ★ | ☆ |
| Dilution stability(centrifugation) | ★ | ★ | ☆ |
| Millbase viscosity | ★ | ★ | ☆ |
| Dispersion fineness(μm) | ≤2.5 | ≤2.5 | ≤2.5 |
| Change of storage viscosity | Without thickening and thixotropy | Without thickening and thixotropy | Without thickening and thixotropy |
(When actual operation: First add dispersant into water, then add powder, 4000rmp/min 10min. After powder completely wetting, put into grinding glass beads to start timing grind.)
Recommended Applications
- Water-based inks
- Architectural coating
- Wood and furniture coatings
- Automotive coatings
- Can coatings
- Anticorrosive paint
- Leather coatings
- Suggested dosage of organic pigment(Based on pigment, Toynol® dispersants calculate solid content SOP):10-50%;
- Suggested dosage of inorganic pigment(titanium dioxide)(Based on pigment, Toynol® dispersants calculate solid content SOP):3-7%;
- Do not add wetting agents separately;
- Toynol® wetting agents can accelerate original powder wetting;
- Adding Toynol® defoamers can quickly eliminate grinding foam;
- To obtain optimal performance, Toynol® additives must be added in water before resin and pigment;
- Advise gradient test to get optimal dosage;
As liquid material, this product should be sealed and placed in a dry, cool, well-ventilated place at room temperature
| Packing & Delivery |
Packing Details : 200ml bottle, 25kg plastic drum, 180kg iron drum
Delivery Details : Express for sample, Airfreight and Ocean freight for products
| Certificates |
EU REACH ISO9001:2008 Quality ISO14001:2004 Environment OHSAS18001:2007 Certification| Company |
| FAQ |
Q: Are you trading company or manufacturer?
A: We are factory with Certification of ISO9001:2008, ISO14001:2004 and OHSAS18001:2007.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free charge and pay the cost of freight if you sincerely test.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
| Contact us |
