Audited Supplier
Introduction:
Our production of the unloading tripper car is based on the advanced technology and experience at home and abroad
on the basis of the design, is the original TD75 belt conveyor heavy, light unloading truck series ideal upgrade
dust control unique. This series of unloading tripper car can be widely used in metallurgy,mining, thermal power,
building materials, coal, fire and other industries.
This series of discharge tripper car for conveyor since the success of the study, due to the use of good performance in the
South Steel, Guizhou Goupitan power station, Ma On Shan, on the steel and other industries have been widely
used by users praise.
For applications where more than one conveyor discharge position is required, we offers several approaches and options to meet the demands of the project, among them, belt trippers, belt plows/belt diverters, and reversing shuttle conveyors. Whether you need a reversing belt with discharges at both ends, filling multiple bins along the length of the conveyor, or you need to create a long continuous pile such as in filling a bulk storage building, we have your bulk material handling needs covered.
BELT TRIPPERS
A belt tripper is used to "trip" the material off the conveyor at specified locations between the terminal pulleys. A belt tripper can either be in a fixed position, or travel continuously at a constant speed for layered stacking.
A belt tripper consists of a structure with two pulley assemblies. As the belt passes over the upper pulley, the material is discharged from the belt into a collection chute. The material is then diverted to one side or both sides of the belt for discharge, or back onto the belt if the desired discharge position is at the end of the conveyor. Several powered drive options and chute configurations are available.
FEATURES
- Four wheel drive
- Heavy-duty Construction
- Custom Design:our belt trippers are designed around your unique requirements and how the material flow should be re-directed. Common options include one, two, or three way discharge chutes with diverter and/or auxillary feeders (screw feeder, reversible belt feeder, etc.).
- Engineered Pulley Loop: The conveyor belting travels through a set of pulleys which create the material "trip," or discharge point and then redirects the belt back on to the idlers. This "pulley loop" is designed so the conveyor belting will experience a very limited amount of stress, eliminating the opportunity for premature wear and stretching.
- Direct Drive: our belt trippers are equipped with direct mounted motor and gear reducers that are separate from the main conveyor drive components. This allows for the tripper travel to be controlled from either a remote or local location.
A - Discharge Pulley
B - Return Bend Pulley
C - Cable Reel
D - Rail and Rail Support Beam
E - Tripper Wheels
F - Direct Drive Motors
G - Tripper Wheels
H - Diverter Chutes
I - Discharge Hood
Our workshop
Our sales team
