Audited Supplier
Our thrust bearings and bushes are used for submersible motors and pumps.
We can add CED coating on cast iron part to extend the lift time.
Our shaft bushes and sleeves are sold to USA, Europe, Russia, Middle East, Asia etc.
We can provide standard sizes and customized sizes too.
We can produce based on your drawings and make coating as required.
Tungsten carbide, we have different density as required and the popular grades are YG6, YG8, YG15, YWN8 and YWN20 etc.
| Rolling Body: | Roller Bearings |
|---|---|
| The Number of Rows: | Multi-column |
| Outer Dimension: | Small and Medium-Sized (60-115mm) |
| Material: | Tungsten Carbide |
| Spherical: | Non-Aligning Bearings |
Tungsten Carbide Sleeve (Bushing) Bearing have the excellent properties, such as wear resistance, scratch, abrasive resistant, anti-corrosion, high efficiency of heat conduction, low maintenance, good compression property, high strength, stable performance.
Tungsten Carbide Sleeve (Bushing) Bearing are mainly used for oil industry,Used for Water Pump, Oil Pump high temperature furnace components, crucible, missile rocket nozzles etc. It is also used for pressing blanks for spinning thin-wall tubes and other special purposes.
In order to achieve the best possible performance, it's very important to choose the suitable material grade for your application, our experienced engineers can assist you with your design and material selection ensuring the best usage for your particular need.
| ISO Code | Grade | Density (g/cm3) | Hardness (HRA) | TRS Mpa | Applications recommended |
| K05 | YG6X | 14.8-14.9 | 91-92 | >=2080 | Wear resistance Machining metals, woods |
| K10 | YG6A | 14.8-14.9 | 91.5-92.5 | >=2180 | |
| K20 | YG6 | 14.8-14.9 | 90.5-91.5 | >=2280 | |
| K30 | YG8 | 14.75-14.85 | 90-91 | >=2380 | |
| YN8 | 14.7-14.8 | 90-91 | >=2300 | Corrosion resistance Wear resistance | |
| K40 | YG15 | 14.0-14.2 | 86-87.5 | >=2780 | Wear resistance Strong impact |
| MG1 | 5.0-6.0 | 91.5-92.5 | >=800 | Corrosion resistance Wear resistance | |
| MG2 | 9.0-10 | 88.5-89.5 | >=1000 | ||
| MG3 | 12-13 | 90-91 | >=1200 | ||
| YG20C | 13-14 | 84 | >=3200 | Dies | |
| YG22C | 12.8-13.8 | 83 | >=3400 | ||
| YG25C | 12.6-13.6 | 82 | >=3500 |
Main Products
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter: Woodworking tool cutter, V-cutter, mining tool, Any customized carbide products are acceptable.
Welcome to contact for E-catalog and discount
EVERGREEN HARDMETAL TOOLS CO.,LTD
