Audited Supplier
Two Component PU Filling Machine LED light strips and LED in aluminum housing profiles
Our glue dispensing machine for led light developed innovative polymer solutions for the encapsulation of LED light strips and LED in aluminum housing profiles. For this specific application we are capable of supplying a turn-key solution, our machines granting the possibility to encapsulate parts up to 10 meters long!
By using our technology it is possible to encapsulate LED and make them "outdoor & chemical resistant". It is possible to obtain IP68 water proof LEDs according to IP rating.
we successfully passed all tests proving that it can be suitable for internal as well as external applications. By encapsulating with our resin, LEDs will never face any problems of yellowing and ageing. There are different types of resins available, from very flexible up to rigid ones.
NEW! we patented a new technology which maintains the light temperature of the LED.
Our Machine for LED LAMPS
CHEMICAL AND OUTDOOR RESISTANCE
It is possible to protect with resin also other kind of LEDs, for example the one used in industrial sites, that sometimes need a special protection against chemical agents. In fact some LED lamps have to resist to ammonia, common in some kind of factories. This is why all the pcb is fully encapsulated. There are many applications also for street lamps, that have to resist to outdoor conditions, even very hard sometimes.
Our Machine for LED LAMPS
CHEMICAL AND OUTDOOR RESISTANCE
It is possible to protect with resin also other kind of LEDs, for example the one used in industrial sites, that sometimes need a special protection against chemical agents. In fact some LED lamps have to resist to ammonia, common in some kind of factories. This is why all the pcb is fully encapsulated. There are many applications also for street lamps, that have to resist to outdoor conditions, even very hard sometimes.
Our machine for FLEXIBLE LED STRIPES
FLEXIBLE AND PROTECTED
The use of resins for LED insulation can give special properties and expand the range of use of these versatile lighting units. When also LEDs housing is made of resin, the LED is flexible enough to allow architects and designers to imagine new lighting solutions in every area.
Great news on the market, flexible LEDs offer new product solutions in previously unattainable places. The LEDs are applied in resin bars up to 10 meters long, allowing them to coat with a single piece whole body walls.
Model No: | PJL-100 |
Mixing Ratio | 100:100-10:100(1:1-1:10) Adjustable |
Metering precision | ±1% |
Outflow speed | 1g/sec-15g/sec |
Mixing precision | ±1% |
Mixing mode | Dynamic mixing /Static mixing |
Glue Viscosity | Lower than 20000 CPS(mPa·s) |
Control mode | PLC + Touch Screen |
Control system | Independent R&D |
Measuring mode | Stepping motor/High-precision, wear-resistant, long-life Gear pump |
Working voltage | AC 220V 50Hz/60Hz |
Power requirement | 3.55KW |
Air pressure requirement | 4.5-8KG |
Machine Dimension | 1500(L)*1200(W)*1500(H)mm |
Weight | approx 260 KG |
Work environment | Humidity: 20%~98%RH; Temperature: 0~+40°c |
Suitable Material: For waterproof, adhesive, fixed two-component adhesive.
Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU), etc.
Applications:LED products ,Crafts,Electronic components
Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor, Photovoltaic module, Photovoltaic inverter .etc
IV:Application
V, packing
