Audited Supplier
38891-59-7
Structural Adhesive
Paste
Construction
Epoxy
Room Curing
Epoxy
Adhesive
Curing Agent
Organic Material
White
GNS
Bucket
9L bucket or 10L bucket, Gross weight is upon requ
China
35061000
Product Description
Two-component stone epoxy adhesive for bonding ceramic and natural stone slabs to vertical surfaces
Two-component stone epoxy adhesive for bonding ceramic and natural stone slabs to vertical surfaces is a two-component epoxy adhesive for bonding ceramic and natural stone slabs to vertical surfaces for indoor or outdoor applications, and will not deteriorate over time. It can be used to bond directly to the wall substrate and maintains its non-sag consistency. It has good weathering, ageing resistant, and strong structural adhesion ability.
PRODUCT FEATURES
- Easy to use, 1:1 mixing ratio by volume
- Durable permanent bond, will not deteriorate over time
- Structural bonding ability for all kind of stone, metal, ceramic etc
- Strong impact resistance and Strong compressive strength
- Prevent dewing excellence
- High impact toughness and good flexibility
- Good weathering resistance and ageing resistant
- Non-sag consistency
APPLICATIONS AREAS
- Bonding ceramic and natural stone slabs to vertical surfaces for indoor or outdoor
- Excellent for bonding stone & tiles to all masonry surfaces including cement sheet, cement render, plasterboard, timber.
- It can be used to bond directly to the wall substrate and maintains its non-sag consistency
- Perfect for all interior cladding of tile, stone and porcelain veneers
- The surfaces must be clean and free from dust and grease
- Mix parts A and part B with 1:1 ratio by volume, until uniform in color
- Apply the mixture evenly distributed on back of the stone or tile
4.Keep the assembled parts from moving during cure
STOREAGE AND SHELF LIFE
12 months in unopened packing store in temperature between +5ºC to +25ºC, Keep in cool, shade and well ventilated area
PACKAGING
9L bucket or 10L bucket, Gross weight is upon request
Stand color: Off-White
SAFETY RECOMMENDATION
- Irritating to eyes and skin
- If eyes contact occurs, immediately flush eyes with plenty of water and consult doctor
- Use only in well-ventilated areas
- Avoid contact with eyes. Keep non-cured adhesive away from children
- Protect finished work from moving until fully cured
| Mix ratio | 1:1 by volume | |
| Working time | 10 min | |
| Initial curing time | ≥30~90min | |
| Fully cured | ≥24 h | |
| Impact strength | ≥3 KJ/ | |
| Tensile-shear strength (stone-stainless steel- stone-stainless steel) | ≥8 MPa | |
| Impact Strength | ≥2.5MPa | |
| Press shear strength (stone-stone) | Standard 48h | ≥10 MPa |
| Water soak process 168h | ≥7 MPa | |
| Heating process 80ºC, 168h | ≥7 MPa | |
| Freezing and heating cycle treatment ,50 times | ≥7 MPa | |
| Press shear strength (stone-stainless steel) | Standard 48h | ≥10 MPa |
