Audited Supplier
0.7T-2.5T, 3.0T-5.0T, 5.3T-10T, 12.5T-26T
7*24h
1year
Precast Concrete Connection
ISO
Yes
Forged
Steel
Lifting Anchor
Holes Anchor
Hardware
JH or OEM
According to Your Requirement
Customized
China
7326909000
Product Description
The head of the Two-Hole Anchor is similar to the head of the spread anchor. The second hole in the lower part of the anchor allows an additional reinforcement bar to be used. Anchorage in the concrete is achieved with this additional reinforcement bar. Longer anchors with more additional holes can be made on request.
spread anchor is a responsible transport anchor system.the anchor will be delivered prefinished and can be used for installation in all concrete components.
before using the spread anchor the environment has to be checked which is specified in the installation instruction.
the two hole anchor is technically equal to spread anchor.but the two hole anchor has to complete with reinforcement as installation instruction.
| Load Group | Article No. | Spec. | Available Surface | |
| 0.7T-2.5T | ABS-THA-007090 | 0.7Tx90mm | E.G(ELECTRO GALV.) | H.D.G(HOT DIPPING GALV.) |
| ABS-THA-014090 | 1.4Tx90mm | |||
| ABS-THA-020090 | 2.0Tx90mm | |||
| ABS-THA-025090 | 2.5Tx90mm | |||
| 3.0T-5.0T | ABS-THA-030120 | 3.0Tx120mm | ||
| ABS-THA-040120 | 4.0Tx120mm | |||
| ABS-THA-050120 | 5.0Tx120mm | |||
| 5.3T-10T | ABS-THA-053160 | 5.3Tx160mm | ||
| ABS-THA-075160 | 7.5Tx160mm | |||
| ABS-THA-100165 | 10Tx165mm | |||
| 12.5T-26T | ABS-THA-125240 | 12.5Tx240mm | ||
| ABS-THA-220300 | 22Tx300mm | |||
| ABS-THA-260300 | 26Tx300mm | |||
Main Applications: Prestressed concrete trusses, thin-walled elements, low strength concrete (e.g. lightweight concrete)
Parameters: Component thickness, concrete grade, reinforcement
Finishes: Black / Hot Dipped Galvanized
Two Hole Anchor is effectively used for stripping panels from tilt tables and transporting panels. It is also a good choice in applications where spread-type anchors can't be used and in panels constructed with lightweight concrete. It is designed with a secondary hole that can accept additional rebar or a Tension Bar to increase lifting capacity and to distribute lifting loads deep into the concrete.
Features:
1. Higher Standard Products
2. Shorter Production Cycle
3. More Corrosion Resistant
4. More Optional Delivery Methods
5. Comprehensive After Service
