Audited Supplier
The direct factory for all kinds of good quality semi trailers
1.18 years experience manufactory
2.CCC,ISO,SGS,BV agree
3.Well designed ,small order accept.
4.Manufacture according to your detail requirements
5.After-sale-support;6 month guarantee term
Van Type Box Semi Trailer
Our warranty and relative terms
1.12 months guarantee system
2. High quality with reasonable price and after-sales service
3. Practical and Economical
4.3C & ISO certification
5. Small order can be accepted.
6. More than 12 years experience manufacturer
7. We accept full inspection
8. Payment terms: TT L/C
9. Delivery time: Within 10 working days after receipt of the deposit
10. Export port: Qingdao/Tianjin
| Dimension: | 10000-13000*2550*3400 mm |
| Payload: | 60,000 kgs |
| Tare weight: | Approx. 9,500 kgs |
| Main beam: | Material Q345. Fabricated "H" beam height 500mm, Top flange thickness 14mm, Middle web thickness 8mm, Bottom flange thickness 16mm |
| Side beam: | 16# channel steel |
| Platform: | 3mm thick checkered plate. |
| Side walls: | 600-1800 mm height. |
| Kingpin: | JOST 2" Kingpin, bolted in type |
| Welding standard: | All welding are to be done by qualified welder per applicable national standard |
| Painting: | Complete Chassis sand blasting to clean rust, 1 coat of anti corrosive primer, twice coats of final paint |
| Suspension: | Leaf spring or Air suspension |
| Axle: | FUWA/BPW 13 tons axles |
| Brake system: | Dual line pneumatic brake, with hose and connector |
| Brake chamber: | 6 units T30/30 spring brake chambers |
| Air tank: | 40L, 2 pcs, China |
| Emergency relay valve: | WABCO/Shunanda relay valve |
| Tire: | 12R22.5, 12 pcs. |
| Landing gear: | Standard 28T two speed telescopic manual landing gear |
| Electrical | Voltage:24V Receptacle: 7 ways (7 wire harness) A full set of LED lights installed on the trailer, front rear side turning etc. |
| Spare wheel carrier | Two sets of spare wheel carrier |
| Accessory | One tooling box with a set of standard trailer tool |
In nude,Polish with water wax before shipment
1. How do you transport the semi trailers
We will transport the trailers by bulk or cotainer,we have possess long-term cooperation with ship agency who can provide you lowest shipping fee.
2. Can you satisfy my spacial requirement?
Sure! We are direct manufacturer with 18 years experience and we have strong producing capacity and R&D capacity.
3. How can you guarantee quality?
Our raw material and OEM parts including axle, suspension,tyre are purchased centralized by ourselves,every part will be inspected strictly.Moreover,advanced equipment rather than only worker is been applied during the whole producing process to ensure the welding quality.
4.Can I have samples of this type of trailer to test the quality?
Yes, you can buy any samples to test the quality,our MOQ is 1 set.
6. What's the delivery time and can you lower the price?
It depends on your order. The delivery time is 15 workdays after we received your prepayment. If you have place an order of large quantities, then ,of course, the price can be lowered.
7. Can I customize the painting and the logo?
Yes, we offer customized logo for any type.
8. What's the payment method?
TT 30% as Deposit, Balance Before shipment by TT or L/C at sight
