Audited Supplier
1. The Light is coming when people go through the sensory area, or turn off automatically when people leave.
2. One remote control can control all lights linked to it in 4O mode.3. It has a manual switch that you can use to turn on and off the floodlights. For your Lights to work this must always be on.
4. Ultra long battery life-such as setting a delay of 15 seconds for lighting and sensing 200 times per night, which can last for 5-7 days.
5. Charging Indicator Led.
1. Solid Green LED = Battery full Charged
2. Flashing Green or Yellow or Red = Battery charging
3. Battery Level Display:
Green LED = High Volt(12.6V-11.8V),
Yellow LED = Medium Volt(11.8-10.2V),
Red Led = Low Volt(10.2V-9V).
Please Note:The indicator will flash when charging, and when fully charged, it will display green.
On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control, it must always be on.
# Once a program mode is selected the light cannot be turned ON/OFF or dimmed with the Master button. Choose button '4o' (RF mode) to revert to standard mode to control these functions.
Programme Clear
If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
1. Turn on the light.
2. Quickly press Master " I " key 5 times.
3. LED lights will blink 5 times which means that the Programme is cleared successfully.
- In 4O mode, use the Master Buttons to turn all lights On and Off Together.Press and Hold the Dimmer+/Dimmer-. All lights can be dimmed together.
- Use the Group Buttons to choose lighting modes. When a certain mode is selected, the white light will blink once to confirm.
- The controllable range of the remote control and light can reach up to 100 meters.
The PIR Sensor
The stand by time default value is 10 seconds. It is possible to adjust the standby time before shipment. Its sensing distance is approximately 8meters.
2.4GHz self-organizing network instructions
| When these lights are installed one after another, spaced about 50 meters apart, and they are synchronized with the same remote control, they will automatically network and form a local area network. In the network, each lamp is equivalent to a signal relay, so it can propagate signal forward one after another, which is suitable for controlling multiple lamps. |
Application
Applications
1. Are you a factory or a trading company?
A: We are a manufacturer. Welcome OEM and ODM for you.
2. Can we have a sample order?
A: Of course! Any sample order is welcome for testing and checking.
3.What is the warranty for the products?
A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years
4. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 2-3weeks.
5.How to ship the goods?
A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)
6.How to deal with the faulty?
A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation.
