Audited Supplier
WR-01
CE, SGS
Turbine Oil, Lubricant Oil, Transformer Oil, Engine Oil
380V
200 L/min
Crude Oil
Gasoline Diesel Base Oil
85%
After Sale Good Service
Recycling and Distillation
All The Time Supporting
WR
Standard Packing
as capacity
Jiangsu China
8419409090
Product Description
Wuxi wanrong Environmental Protection Technology Co., Ltd, is occupied in Petroleum refining, Pro-Environment, Chemical Technical Application, Technical Research and Development of the Project. Project design Equipment manufacturing and sales. The company has deep cooperation with sinope Shanghai Research Institute, and Nanjing Chemical Research Institute. Technology has always had a leading advantage in the industry. The company latest research and development of oil-gas phase directed catalytic cracking of waste engine oil regeneration technology, completed from the design, research and development volume output qualified diesel products.
Tire oil-gas phase catalytic separation of gasoline and diesel products all meet the national requirements of oil products. New
type Thin film + fractional distillation refining and regenerating base oil technology of Carclazyte, New type Thin film +
fractional distillation + NMP refining and regenerating base oil technology, the products has reached the international API
standards.
Product property
The raw material is based on the crude oil data sent by the customer and the evaluation made. The basic properties of the raw material are as follows:
Real boiling data:
2. Product and by-product summary
Tire oil-gas phase catalytic separation of gasoline and diesel products all meet the national requirements of oil products. New
type Thin film + fractional distillation refining and regenerating base oil technology of Carclazyte, New type Thin film +
fractional distillation + NMP refining and regenerating base oil technology, the products has reached the international API
standards.
Product property
The raw material is based on the crude oil data sent by the customer and the evaluation made. The basic properties of the raw material are as follows:
| Project data analyst | Data | ASTM |
| API degree | 64.3 | D 1298 |
| Density,g/cm3 15ºC | 0.853 | D-5002 |
| viscosity,mm2/s, 100ºF | 7.25 | D-445 |
| Pour,ºC | -46 | D5853 |
| Ash, % | 0.07 | D-482 |
| Acid value, mg KOH/g | ||
| Salt content, mg/l NaCl/l | 16.2 | D-3230 |
| sulphur %Mass | 0.17 | D-4294 |
| Carbon residue %Mass | 0.7 | D-6560 |
| Sulfuretted hydrogen, ppm | <1 | B.P |
| Test standard | ASTM-D86 |
| temperature(ºC) | Yield(V%) |
| 12 | IBP |
| 79.4 | 4.25% |
| 149 | 17.98% |
| 204 | 28.1% |
| 260 | 41.38% |
| 208.5 | 30% |
| 287.5 | 40% |
| 343.0 | 64.07% |
| 426 | 16.81% |
| 565 | |
| >565 | |
| Total recovery | 80.88% |
| Residue | 19.12% |
| Loss | 1% |
| No. | Material name | Main Specification | Output | Method of transportation and destination |
| 100% | ||||
| 1 | Gas + loss | 0.3 | Pipeline transport to catalyze compressor inlet | |
| 2 | Sump oil | 0.34 | Pipeline transportation, to the original oil pump inlet or dirty oil tank area | |
| 3 | Naphtha | 22 | Pipeline transport, to tank farm or reforming plant | |
| 4 | Atmospheric first line oil | 13 | Pipeline transportation, to tank farm or jet fuel hydrogenation unit | |
| 5 | Atmospheric second line oil | 13 | Pipeline transport, go to tank farm or diesel hydrogenation unit |
