Audited Supplier
WPC burner is nozzle mixing gas firing burner, designed for thermal incinerator, TAR, TNV waste incinerator. WPC burner doesn't need external combustion air, but use oxygen from waste gas, which lead to very high heat efficiency. WPC burner works in wide range, max process temprature upto 1150ºC
A profile plate(installed onsite) surrounds the burner and creates a pressure drop which directs the passing effluent air stream through the burner's cone and extension ring at a high velocity where it is mixed with a controlled volume of fuel gas. With the intensive mixing and turbulent condition created within the burner's mixing cone, a rapid temperature rise from the combustion reaction is produced to help ensure complete incineration of the effluents
| WPC data sheet | WPC-50 | WPC-`00 | WPC-200 | |
| Firing capacity (Kw) | Max | 600 | 1200 | 2400 |
| Min | 10 | 60 | 120 | |
| Pilot capacity (Kw) | 10 | 60 | 60 | |
| Gas pressure (Kpa) | 3.5 | 1.5 | 1.5 | |
| Process air Dp (Kpa) | 0.25 | 0.25 | 0.25 | |
- Dual fuel design, fuel oil and gas firing
- 20:1 turndown ratio for gas firing
- No external combustion air required
- Simple installation, low maintenance
- Max process temperature 1150ºC
- TNV incinerator
- TAR incinerator
- Coating line
- Printing line
- Paint baking ovens
WPC 100(1200Kw)+ DN50 fuel train + Control cabinet for VOC incinerator in 2018
For kinds of applications, we provide tailor made solitons as project demand, include burners, fuel train system, BMS
