Walk-in Temperature and Humidity Test Chamber Laboratory Reliability & Stability Instrument

The environmental test chamber can accurately simulate complex natural environments such as low temperature, high temperature, high temperature and high humidity, low temperature and low humidity, etc. It is suitable for product reliability testing in various industries such as plastics, electronics, food, clothing, vehicles, metals, chemicals, and building materials. .
The walk-in constant temperature and humidity test chamber is suitable for testing various performance indicators of aerospace products, information electronic instruments, materials, electrical engineering, electronic products, and various electronic components in high and low temperature or hot and humid environments.

High intelligence: According to the test conditions and requirements, automatic control reaches the set value with the maximum capacity and maintains the set value with the minimum capacity to achieve the best overall control.

High reliability: reasonable structure, easy installation, automatic fault recovery function, and easy maintenance.
Consumption and energy saving: heating and humidification work alternately, multi-circuit throttling thermal expansion refrigeration circuit.
Special design: Targeted design can be carried out according to customer needs, and the internal dimensions and performance indicators of the box can be changed.1. GB/T2423.1-2001 low temperature test method;
2. GB/T2423.2-2001 high temperature test method;
3. GB/T2423.22-1989 Temperature change test N;
4. National MIL standard GJB150.3-86;
5. National MIL standard GJB150.4-86;
6. National MIL standard GJB150.5-86;
7. GJB150.5-86 temperature shock test;
8. GJB360.7-87 temperature shock test;
9. GJB367.2-87405 temperature shock test.
10. SJ/T10187-91Y73 series temperature change test chamber - one box type
11. SJ/T10186-91Y73 series temperature change test chamber - two-box type
12. Meet the standard IEC68-2-14_Test method N_Temperature change
10. GB/T2424.13-2002 Test Method Temperature Change Test Guidelines
11. GB/T2423.22-2002 temperature change
12. QC/T17-92 General rules for weather resistance testing of automobile parts,
13. EIA364-32 thermal shock (temperature cycle)

The base of the walk-in constant temperature and humidity test chamber is made of 8# channel steel welded into a mesh frame so that it can bear the weight of the chamber and personnel test pieces under horizontal conditions without causing unevenness and cracking on the bottom of the chamber. . The bearing capacity is 200kg/square meter. The chamber body (the main body of the test chamber (shell)) is divided into six chamber surfaces and a double-open chamber door. The size is 1800×2000 mm. The chamber body material is a high-quality stainless steel plate with an inner liner. (To prevent the inner wall from rusting under humid operation for a long time), the outer tank is made of high-quality color steel plate (domestic famous brand), and the insulation medium is polyurethane hard foam insulation, which is light and resistant to impact, and has good thermal insulation performance. The door material of the constant temperature and humidity test chamber is also made of color steel plate, and the door handle is open-type inside and outside, so that the test personnel can freely open the door from the closed room.

Model:HYHW(4/8/12/15/24/40)

Controller: Original imported color screen LED LCD touch screen controller

Temperature range: Minimum test temperature: 0ºC, -10ºC, -20ºC, -40ºC, -50ºC, -60ºC

Maximum test temperature: +85ºC (+120ºC, +150ºC)

Humidity range: 20%~90%RH

Temperature deviation: ≤2.0ºC

Humidity deviation: ±3.0%RH (>75ºCRH) ±5.0%RH (≤75%RH)

Internal size (cm): W 200 400 400 500 600 600

H 210 210 210 210 210 210

D 200 200 300 300 400 500

External size: SUS304 stainless steel

Outer Chamber material: High-grade steel plate with electrostatic spraying surface treatment

Insulation material: rigid foam

Protection device: fuseless switch, over-temperature protector, ceramic fuse,

Motor overload protection, fault indicator light, over-temperature protector, compressor over-current protection

Power supply: AC 380V±10% 50Hz 3-phase 5-wire (3 live wires, 1 neutral wire, 1 protective ground wire)

Floor load: 500kg/cubic centimeter