Audited Supplier
LED Explosion Proof Lights have good explosion-proof function, suitable for IIA, IIB, IIC explosive gas environment and various inflammable and explosive places, mainly used in railway, electric power, metallurgy, petroleum, petrochemical, chemical, steel, aviation, ship and each efficient lighting in factories, stations, large facilities, venues and other places.
Explosion proof high bay pendant light provides about 130lm/w and are designed to meet globel explosion proof Standard.
Features
- Instant on crisp white light output
- High efficiency drivers and LEDs provide small energy cost in harsh and heavy industrial applications
- Isolated LED compartment reduces temperature within driver housing
- Dense cooling fins design enhances airflow for greater heat dissipation
- High transparency crystal tempered glass for less light loss
- 5 year fixture warranty
Suitable for IIA, IIB, IIC explosive gas environment and various flammable and explosive places. Mainly used in railway, electric power, metallurgy, petroleum, petrochemical, chemical, steel, aviation, ship, stations, large facilities, venues and other places.
| Name | Description | Quantity | Name | Parameter |
| Outer box | 37.3*37.3*25.3cm | 1 | N.W. | 7.8kg |
| Paper tray | Set of compressive cardboard | 1 | G.W. | 8.7kg |
| Cardboard | 7-layer corrugated paper | 1 | ||
| Packaging method | 1 pack 1 With compression cardboard | |||
Schematic diagram
1.Before installation, it is necessary to check whether the actual operating conditions are in conformity with the parameters listed on the lamp nameplate.
2.Before installation, please test the lighting according to the parameters of the lamp nameplate to ensure that there is no quality problem before installation.
3.Before installation, it is necessary to determine the installation location and mode of the lamps according to the installation mode provided by the product, in combination with the on-site use environment and lighting requirements, so as to ensure that the installation is firm and reliable.
4.Connect the prepared cables with the input cables of lamps and lanterns according to the corresponding fire (brown), zero (blue) and ground (yellow-green) wires, so as to ensure that the connection is firm, and make good insulation and waterproof measures at the connection.
5.The input end of the cable can be connected to the power supply of the corresponding voltage to illuminate.
Using The Matters Needing Attention
1. This product is an explosion-proof product and can be used in explosion-proof places.
2. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.
3. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.
4. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.
5. The luminaire must be reliably grounded
Quality Assurance
The company has passed ISO9001:2008 international quality system audit certification, this product strictly implements ISO9001 international quality management system standard production, to ensure that the product quality fully meets national standards and design requirements.
